Skip to content
[Solved] How to fix MagSafe 3 Blinking Amber LED and Refusing to Charge caused by SMC Power Delivery controller handshake fault on MacBook Pro 16″ M1 ProMappleCare Community ↗

[Solved] How to fix MagSafe 3 Blinking Amber LED and Refusing to Charge caused by SMC Power Delivery controller handshake fault on MacBook Pro 16″ M1 Pro

Started by Jeffrey Graham • November 19, 2026 at 10:36 am • 1 Community Replies • 2 Participants

Home › Forums › Battery, Charging & Thermal Care › [Solved] How to fix MagSafe 3 Blinking Amber LED and Refusing to Charge caused by SMC Power Delivery controller handshake fault on MacBook Pro 16″ M1 Pro

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #109911
    Kullanıcı ProfiliJeffrey Graham
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 16″ M1 Pro | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256630449

    I am running into a persistent issue on my MacBook Pro 16″ M1 Pro running macOS Sequoia 15.1.
    Whenever the machine encounters SMC Power Delivery controller handshake fault, the following diagnostic log appears in Console:

    AppleSmartBattery: [Power] MagSafe 3 EPR 28V/5A handshake negotiation rejected: resistance anomaly

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 16″ M3 Max (128GB) | SanDisk Professional G-RAID Shuttle 4 | Minneapolis, MN
    Final Cut Pro / DaVinci Colorist & Editor | "Verified Apple Discussions Archive"
    #109912
    Kullanıcı ProfiliHenry Scholz
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
    2. Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
    3. Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M1 Max (32GB) | Dual Dell UltraSharp 4K | Logitech MX Master 3S | Pittsburgh, PA
    Apple Certified Support Professional (ACSP) | Product Designer & Design Systems Lead
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.