Skip to content
MappleCareMappleCare Community ↗

[Solved] MacBook Pro 16″ M3 Max MagSafe 3 Blinking Amber LED and Refusing to Charge (macOS Sequoia 15.1) – Verified Troubleshooting

Started by Rachel Schroeder • November 16, 2026 at 10:33 am • 1 Community Replies • 2 Participants

Home › Forums › Battery, Charging & Thermal Care › [Solved] MacBook Pro 16″ M3 Max MagSafe 3 Blinking Amber LED and Refusing to Charge (macOS Sequoia 15.1) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #40794
    Kullanıcı ProfiliRachel Schroeder
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 16″ M3 Max | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256438431

    I am running into a persistent issue on my MacBook Pro 16″ M3 Max running macOS Sequoia 15.1.
    Whenever the machine encounters SMC Power Delivery controller handshake fault, the following diagnostic log appears in Console:

    AppleSmartBattery: [Power] MagSafe 3 EPR 28V/5A handshake negotiation rejected: resistance anomaly

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 14″ M4 (24GB) | iPad Air M2 | Keychron Q1 Pro | Auckland, NZ
    Computer Science & Machine Learning Student | "Verified Apple Discussions Archive"
    #40795
    Kullanıcı ProfiliKelly Reyes
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
    2. Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
    3. Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.

    Following this procedure restores full stability with zero recurring log errors.

    iMac 24″ M3 (16GB) | AST 2 Diagnostic Station | ESD Workstation | Vancouver, BC
    Apple Certified Support Professional (ACSP) | Apple Certified Service Technician (ACiT / ACSP)
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.