How to Fix Apple Error 1013: Host system etc/hosts file redirecting gs.apple.com to inval
1. Overview & Failure Manifestation
Error 1013 manifests during the final phase of an iOS/iPadOS restore or update workflow when the host machine (macOS or Windows) attempts to contact Apple’s signing server gs.apple.com to obtain a personalized firmware signature (SHSH blob) for the target device’s ECID. The host’s /etc/hosts file contains a static override mapping gs.apple.com to 127.0.0.1 or ::1, typically injected by legacy jailbreak utilities (e.g., TinyUmbrella, redsn0w, or iREB) to facilitate on-device SHSH caching. When the restore daemon (MobileDevice.framework / iTunesMobileDevice.dll) initiates the TLS handshake to gs.apple.com:443, the connection is redirected to the local loopback interface. No local HTTP server presents a valid Apple signing certificate, causing the SSL/TLS verification to fail with errSSLPeerAuthFailed (-9807). The restore process aborts immediately.
Exact User-Facing Dialogs:
- macOS Finder (macOS 10.15+): “The iPhone ‘iPhone’ could not be restored. An unknown error occurred (1013).”
- iTunes (Windows / macOS ≤10.14): “The iPhone ‘iPhone’ could not be restored. An unknown error occurred (1013).”
- Apple Configurator 2: “Restore failed: Error Domain=AMDErrorDomain Code=1013 ‘The operation couldn’t be completed. (AMDErrorDomain error 1013.)'”
Console/Log Signature: In Console.app filtered by subsystem com.apple.MobileDevice, the following sequence appears:
AMDeviceSecureStartService: Starting service com.apple.mobile.restored
AMDRestorePerformRecoveryModeRestore: Beginning restore
AMDRestoreCopyDeviceIdentity: ECID=0xXXXXXXXXXXXXXXXX
AMDRestoreGetTSSResponse: Requesting TSS for ECID 0xXXXXXXXXXXXXXXXX, BuildIdentity=...
CFNetwork SSLHandshake failed (-9807)
AMDRestoreGetTSSResponse: Failed to get TSS response: -9807
AMDRestorePerformRecoveryModeRestore: Restore failed with error 1013
The device remains stuck in Recovery Mode (iBoot prompt USBDFU or IBEC), displaying the “Connect to Computer” screen. No NAND write occurs; the firmware partitions remain untouched.
2. Silicon & Firmware Architecture Root Cause
At the silicon level, Error 1013 is not a hardware fault but a firmware provisioning handshake failure orchestrated by the host’s network stack. The restore pipeline involves three distinct trust domains:
- Host OS Network Stack (BSD/macOS or Winsock/Windows): Resolves
gs.apple.comvia/etc/hosts(priority over DNS pernsswitch.confor Windows Name Resolution Policy). The override forces TCP SYN to127.0.0.1:443. - MobileDevice Daemon (
usbmuxd/MobileDeviceService): Establishes a USB 2.0/3.0 bulk endpoint (EP 0x81 IN, 0x02 OUT) to the device’s DFU/Recovery Mode USB descriptor (VID 0x05AC, PID 0x1227/0x1281). The daemon serializes theAMRestoreprotocol over this pipe. - Device-Side iBoot/SEPROM: The Application Processor (AP) runs iBoot in Recovery Mode; the Secure Enclave Processor (SEP) runs
sepOSin DFU/Recovery. Both require a validApTicket(SHSH blob) signed by Apple’s Ed25519 root key to authorize theRestoreRamDiskand subsequent NAND flash operations.
When the host redirects gs.apple.com to localhost, the TLS ClientHello reaches the loopback interface. Unless a local TLS server (e.g., tsschecker server mode) presents a valid certificate chain anchored to Apple’s Root CA (G3/G4), the SecureTransport framework on macOS or SChannel on Windows terminates the handshake with errSSLPeerAuthFailed. The AMDRestore layer interprets this as a signing server unreachable condition and returns kAMDError1013 (0x3F5) up the call stack.
Critically, the Secure Enclave never receives a personalized ticket; thus the SEPROM refuses to decrypt the SEPFirmware payload, and the AP NAND Controller (NVMe/PCIe on A12+, eMMC on earlier) never transitions from IDLE to PROGRAM state. No voltage rails (VCC_NAND, VCCQ_NAND) are toggled for write operations. The PMIC (e.g., PMIC1/2 on A16, Dialog/ARM PMIC on earlier) maintains nominal power rails (1.8V/3.3V) throughout; no brownout or overcurrent event occurs.
3. Diagnostic Verification & Terminal Commands
Execute the following commands on the host machine to confirm the hosts file redirection and observe the TLS failure in real time.
3.1 Verify Hosts File Override
grep -n "gs.apple.com" /etc/hosts
Expected Positive Output:
12:127.0.0.1 gs.apple.com
13::1 gs.apple.com
Line numbers indicate the offending entries. On Windows, run type C:\Windows\System32\drivers\etc\hosts | findstr gs.apple.com in an elevated Command Prompt.
3.2 Live TLS Handshake Capture
log stream --predicate 'subsystem == "com.apple.MobileDevice" AND eventMessage CONTAINS "SSLHandshake"' --info --style compact
Initiate a restore in another window. Observe:
2024-01-15 14:32:11.123 MobileDevice[12345]: [com.apple.MobileDevice:restore] SSLHandshake failed (-9807) for gs.apple.com:443
2024-01-15 14:32:11.124 MobileDevice[12345]: [com.apple.MobileDevice:restore] CFReadStreamErrorDomainSSL = -9807
Field Explanation: -9807 = errSSLPeerAuthFailed (peer certificate validation failure). The stream shows the daemon attempting the handshake against the loopback address resolved from hosts.
3.3 DNS Resolution Trace
dscacheutil -q host -a name gs.apple.com
Compromised Output:
name: gs.apple.com
ip_address: 127.0.0.1
Nominal Output (after fix):
name: gs.apple.com
ip_address: 17.253.144.10
ip_address: 2600:1407:1a00:18::10
3.4 USB Endpoint Verification (Device Side)
system_profiler SPUSBDataType | grep -A 11 "iPhone\|iPad\|iPod" | grep -E "Product ID|Vendor ID|Serial Number|Speed"
Confirms device is in Recovery Mode (PID 0x1281 for iPhone 8+, 0x1227 for legacy) and enumerating at High Speed (480 Mbps) or SuperSpeed (5 Gbps).
4. Step-by-Step Resolution Protocols
Phase 1: Rapid Software & Cache Reset (Zero Data Loss)
- Quit Finder/iTunes/Apple Configurator 2 completely (
Cmd+Q/ Task Manager → End Task). - Flush DNS cache:
- macOS:
sudo dscacheutil -flushcache; sudo killall -HUP mDNSResponder - Windows (Admin CMD):
ipconfig /flushdns
- macOS:
- Restart the
usbmuxddaemon (macOS):sudo launchctl kickstart -k system/com.apple.usbmuxd - Restart Apple Mobile Device Service (Windows):
net stop "Apple Mobile Device Service" && net start "Apple Mobile Device Service" - Attempt restore again. If Error 1013 persists, proceed to Phase 2.
Phase 2: Terminal / Subsystem Pipeline Flush (Command-line Remediation)
- Backup hosts file:
sudo cp /etc/hosts /etc/hosts.backup.$(date +%s) - Remove gs.apple.com entries:
sudo sed -i '' '/gs\.apple\.com/d' /etc/hosts(Windows: Open
notepad C:\Windows\System32\drivers\etc\hostsas Admin, delete lines, Save.) - Verify removal:
grep gs.apple.com /etc/hosts(should return empty). - Flush caches again (repeat Phase 1 step 2).
- Test TLS connectivity directly:
openssl s_client -connect gs.apple.com:443 -servername gs.apple.com -showcerts < /dev/null 2>&1 | head -20Verify
Verify return code: 0 (ok)and certificate chain showsApple IST CA 2 - G1→Apple Root CA - G3. - Initiate restore via CLI (bypasses GUI cache):
/Applications/iTunes.app/Contents/MacOS/iTunes --restore-device <UDID> # macOS legacy # Or use idevicerestore (libimobiledevice): idevicerestore -e -d latest -w
Phase 3: Hardware / DFU Deep Restoration (Complete Firmware Reflashing)
Required only if Phase 2 fails due to corrupted iBoot/SEPROM state or if the device entered a DFU Loop after a failed OTA delta update.
- Enter DFU Mode (hardware key sequence per device generation):
- iPhone 8+/Face ID: Press Volume Up → Volume Down → Hold Side (10s) → Hold Volume Down + Side (5s) → Release Side, hold Volume Down (10s). Screen stays black.
- iPhone 7/7 Plus: Hold Side + Volume Down (10s) → Release Side, hold Volume Down (10s).
- Legacy Home Button: Hold Home + Side (10s) → Release Side, hold Home (10s).
- Verify DFU enumeration:
lsusb -d 05ac:1227(Linux/macOS) or Device Manager → Universal Serial Bus controllers → “Apple Mobile Device (DFU Mode)”. - Restore signed IPSW via
idevicerestoreor Finder/iTunes with Option/Alt+Click Restore to select specific IPSW. - Monitor
AMDRestoreprogress:log stream --predicate 'subsystem == "com.apple.MobileDevice" AND category == "restore"' --info. - Post-restore: Device boots to Setup Assistant. Verify
Settings → General → About → Serial Numbermatches original.
5. Technical Specifications & Parameter Matrix
| Parameter | Nominal Value | Failure Threshold | Remediation Target |
|---|---|---|---|
| gs.apple.com DNS Resolution | 17.253.144.0/24, 2600:1407:1a00::/64 | 127.0.0.1 / ::1 (hosts override) | Public Apple CDN IP via authoritative DNS |
| TLS Handshake Timeout (MobileDevice) | 30 seconds (CFNetwork default) | > 30s or immediate -9807 | < 5s handshake completion |
| USB Bulk Endpoint MaxPacket (Recovery) | 512 bytes (HS) / 1024 bytes (SS) | NAK/STALL > 3 retries | Zero NAKs during TSS request |
| SHSH Blob Validity Window (APTicket) | Per-build epoch (typically 7-14 days post-release) | Expired / Replay attack detected | Current signing window (TSS server response) |
| NAND Program Voltage (VCC_NAND) | 1.8V ± 5% (A12+ NVMe) | < 1.71V or > 1.89V | Stable 1.8V during firmware write |
| SEPROM Firmware Handshake Window | 200ms (SEP → AP nonce exchange) | > 500ms or nonce mismatch | < 150ms with valid ApTicket |
| Hosts File Parse Priority (nsswitch) | files → dns (macOS/BSD) | files entry for gs.apple.com present | No gs.apple.com in /etc/hosts |
| Apple Root CA Trust Anchor | Apple Root CA – G3 (SHA-256: 3B…E7) | Untrusted / Self-signed cert on localhost | Valid chain to G3/G4 root |
6. Frequently Asked Questions
- Q1: Why does Error 1013 occur only at the end of the restore, not at the beginning?
- The initial restore phases (iBEC/iBSS upload, DeviceTree/RestoreRamDisk transfer) occur over the USB DFU/Recovery pipe using locally cached firmware components. The TSS request to gs.apple.com is deferred until the
AMDRestorePerformRecoveryModeRestorestage, where the host must present the device’s ECID and nonce to Apple’s signing server to receive a personalizedApTicket. This is the first and only network transaction in the restore pipeline. - Q2: Can I permanently block gs.apple.com to prevent automatic updates?
- No. Blocking
gs.apple.comvia hosts file or firewall will permanently break all restore/update workflows, including future iOS upgrades, downgrades, and recovery from boot loops. The device cryptographically requires a fresh signature for every firmware installation
Share your exact OS build and Finder/Console snippet in the OS Updates & Error Codes forum room.