Skip to content
[Solved] MagSafe 3 Blinking Amber LED and Refusing to Charge on MacBook Pro 14″ M2 Pro: How to resolve SMC Power Delivery controller handshake faultMappleCare Community ↗

[Solved] MagSafe 3 Blinking Amber LED and Refusing to Charge on MacBook Pro 14″ M2 Pro: How to resolve SMC Power Delivery controller handshake fault

Started by Beatrice Simmons • November 18, 2026 at 1:40 pm • 1 Community Replies • 2 Participants

Home › Forums › Battery, Charging & Thermal Care › [Solved] MagSafe 3 Blinking Amber LED and Refusing to Charge on MacBook Pro 14″ M2 Pro: How to resolve SMC Power Delivery controller handshake fault

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #90888
    Kullanıcı ProfiliBeatrice Simmons
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 14″ M2 Pro | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256081789

    I am running into a persistent issue on my MacBook Pro 14″ M2 Pro running macOS Sequoia 15.1.
    Whenever the machine encounters SMC Power Delivery controller handshake fault, the following diagnostic log appears in Console:

    AppleSmartBattery: [Power] MagSafe 3 EPR 28V/5A handshake negotiation rejected: resistance anomaly

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    iPad Air 13″ M2 (256GB) | Apple Pencil Pro | Denver, CO
    Audio Unit & CoreAudio Architect | "Verified Apple Discussions Archive"
    #90889
    Kullanıcı ProfiliRebecca Rogers
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
    2. Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
    3. Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M1 Ultra (64GB) | BenQ SW321C | Final Cut Pro 11 | Lyon, FR
    Apple Certified Support Professional (ACSP) | Final Cut Pro / DaVinci Colorist & Editor
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.