How to Fix Apple Error 0x80090302: Windows Cryptographic Service Provider (CSP) failed validati
1. Overview & Failure Manifestation
Error 0x80090302 manifests as a SEC_E_INVALID_TOKEN / NTE_BAD_UID failure within the Windows Cryptographic API (CAPI/CNG) subsystem when the Apple Mobile Device Service (AMDS) attempts to validate the X.509 certificate chain presented by an attached iPhone, iPad, or Apple Silicon Mac during the USBMux handshake. The user observes a modal dialog titled “iTunes could not connect to this iPhone” with the subordinate text “An unknown error occurred (0x80090302)”. In Finder (macOS host) this error does not appear; it is exclusive to Windows hosts running Apple Mobile Device Support (AMDS) 16.0+ on Windows 10 21H2 through Windows 11 24H2.
Concurrently, the Windows Event Viewer logs Event ID 1000 from source AppleMobileDeviceService with description “CryptAcquireContext failed: 0x80090302” and Event ID 11 from WinMgmt indicating WMI provider load failure for ROOT\Apple\MobileDevice. The Console (via log stream --predicate 'subsystem == "com.apple.MobileDevice"' on macOS) is irrelevant here; instead, the AMDS debug log at C:\ProgramData\Apple\Logs\AppleMobileDeviceService\AMDS.log reveals the critical sequence:
[ERROR] AMDeviceSecureStartService: CSP ValidateCertChain failed hr=0x80090302
[ERROR] Certificate thumbprint: 3A:7F:11:9C:... (SHA-1 of DER-encoded leaf)
[ERROR] Chain engine config: CERT_CHAIN_POLICY_SSL, dwFlags=0x00000010 (CERT_CHAIN_REVOCATION_CHECK_CHAIN_EXCLUDE_ROOT)
[ERROR] CryptGetProvParam(PROV_ENUMALGS_EX) returned NTE_BAD_UID for container "AppleMobileDevice"
The device itself remains in Normal Mode (not Recovery/DFU), enumerates as USB\VID_05AC&PID_12A8 (Composite Apple Mobile Device), and charges normally. However, the USBMux lockdown handshake stalls at SSLHandshake state 3 (ServerCertificateVerify), causing the host to tear down the TCP connection on port 62078. No data sync, backup, or restore operation can proceed until the CSP validation passes.
2. Silicon & Firmware Architecture Root Cause
The root cause resides in the asymmetric trust anchor mismatch between the device-side Secure Enclave Processor (SEP) firmware and the host-side Windows Certificate Store. During the USBMux TLS 1.2 handshake (cipher suite TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384, curve secp256r1), the device presents a leaf certificate signed by the Apple iPhone Device CA – G3 intermediate, which chains to the Apple Root CA – G3 root. The SEP (T2/T8103/T8112) generates the ephemeral ECDHE keypair inside its hardware RNG (TRNG compliant with NIST SP 800-90B) and signs the ServerKeyExchange parameter with its device-unique EC P-256 private key, which never leaves the SEP’s secure key storage (effaceable storage region 0x2000_0000–0x2000_FFFF).
On the Windows host, AMDS invokes CertGetCertificateChain via crypt32.dll using the Microsoft Enhanced RSA and AES Cryptographic Provider (ProgID: MS_ENH_RSA_AES_PROV, Provider Type: PROV_RSA_AES = 24). The CSP validation fails with 0x80090302 (SEC_E_INVALID_TOKEN) when:
- The Apple Root CA – G3 certificate is missing from the Trusted Root Certification Authorities store of the
LOCAL_SYSTEMaccount (SIDS-1-5-18), which runs AMDS. - The certificate store is corrupted: the
CERT_KEY_CONTEXT_PROP_IDproperty on the root certificate points to a deletedNCRYPT_KEY_HANDLE(orphaned CNG key in%SystemRoot%\System32\config\systemprofile\AppData\Local\Microsoft\Crypto\Keys). - The Group Policy
Computer Configuration\Windows Settings\Security Settings\Public Key Policies\Certificate Path Validation Settingsenforces Revocation Check: Required but the host cannot reachcrl.apple.com(port 80/443) due to firewall or proxy, causingCertVerifyRevocationto returnCRYPT_E_REVOCATION_OFFLINE(0x80092013), which the Apple CSP wrapper maps to 0x80090302. - The AMDS version (e.g., 16.0.0.18) bundles an outdated
MobileDevice.dllthat statically links againstcrypt32.dllversion 10.0.19041.1 (Win10 2004) and fails to initialize the CNG Key Storage Provider (KSP) on Windows 11 24H2 wherencrypt.dllenforces VBS (Virtualization-Based Security) isolation for private keys.
At the silicon level, the USB 2.0 High-Speed PHY (on A14–A18/M1–M4 SoCs) operates at 480 Mbps with a SOF (Start-of-Frame) interval of 125 µs. The SEP firmware (sepOS 17.0+) enforces a handshake timeout of 5.0 s for the ServerCertificate message. If the host CSP validation exceeds this window (typical on degraded Windows CryptoAPI due to CRL download latency > 3 s), the SEP aborts the session and resets the USB endpoint (EP0 STALL), forcing the host to re-enumerate. This hardware-enforced timeout is non-negotiable and baked into the SEP ROM (address 0x1800_0000 in sepOS memory map).
3. Diagnostic Verification & Terminal Commands
Execute the following commands in an elevated PowerShell 7+ (Admin) session. Do not use Command Prompt; CNG operations require the .NET System.Security.Cryptography.X509Certificates namespace.
3.1 Verify Apple Root CA Presence in SYSTEM Store
$cert = Get-Item Cert:\LocalMachine\Root | Where-Object { $_.Subject -like "*Apple Root CA - G3*" -and $_.Thumbprint -eq "6F99E47D3A7F119C..." }
if (-not $cert) { Write-Error "Apple Root CA - G3 MISSING from LocalMachine\Root" } else { $cert | Format-List Subject, Thumbprint, NotAfter, HasPrivateKey }
Output fields: Subject (DN), Thumbprint (SHA-1), NotAfter (expiry UTC), HasPrivateKey (must be False for root).
3.2 Test CSP Acquisition for AppleMobileDevice Container
Add-Type -AssemblyName System.Security
$csp = New-Object System.Security.Cryptography.CspParameters(24, "Microsoft Enhanced RSA and AES Cryptographic Provider")
$csp.KeyContainerName = "AppleMobileDevice"
$csp.Flags = [System.Security.Cryptography.CspProviderFlags]::UseMachineKeyStore
try { $rsa = New-Object System.Security.Cryptography.RSACryptoServiceProvider($csp); Write-Host "CSP Acquired OK: " $rsa.KeySize } catch { Write-Error $_.Exception.Message }
Expected: CSP Acquired OK: 2048. Failure with NTE_BAD_UID (0x8009000B) indicates corrupted machine key container.
3.3 Validate Full Chain with Revocation Check (Simulates AMDS Logic)
$policy = New-Object System.Security.Cryptography.X509Certificates.X509ChainPolicy
$policy.RevocationMode = [System.Security.Cryptography.X509Certificates.X509RevocationMode]::Online
$policy.RevocationFlag = [System.Security.Cryptography.X509Certificates.X509RevocationFlag]::ExcludeRoot
$policy.UrlRetrievalTimeout = New-TimeSpan -Seconds 10
$chain = New-Object System.Security.Cryptography.X509Certificates.X509Chain($false)
$chain.ChainPolicy = $policy
# Use a sample device leaf cert exported from AMDS log or device (requires device connection)
$leaf = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2("C:\Temp\device_leaf.cer")
$valid = $chain.Build($leaf)
Write-Host "Chain Valid: $valid"
$chain.ChainStatus | ForEach-Object { Write-Host "Status: $($_.Status) - $($_.StatusInformation)" }
Critical output: Chain Valid: False with Status: RevocationStatusUnknown or OfflineRevocation confirms CRL/OCSP reachability failure.
3.4 Inspect AMDS Debug Log for Exact Failure Point
Get-Content "C:\ProgramData\Apple\Logs\AppleMobileDeviceService\AMDS.log" -Tail 200 -Wait | Select-String -Pattern "0x80090302|ValidateCertChain|CryptAcquireContext"
Look for hr=0x80090302 immediately after CertGetCertificateChain call.
3.5 Check Windows CryptoAPI Operational Log (Event Tracing)
wevtutil qe Microsoft-Windows-CAPI2/Operational /q:"*[System[Provider[@Name='Microsoft-Windows-CAPI2'] and Level=2]]" /f:text /c:50 | Select-String "AppleMobileDevice|0x80090302"
Reveals CertVerifyCertificateChainPolicy failures with dwError: 0x80090302.
4. Step-by-Step Resolution Protocols
Phase 1: Rapid Software & Cache Reset (Zero Data Loss)
- Stop AMDS and dependent services:
sc.exe stop "Apple Mobile Device Service" && sc.exe stop "Bonjour Service" && sc.exe stop "iPod Service". - Delete the AMDS certificate cache:
Remove-Item -Recurse -Force "C:\ProgramData\Apple\Lockdown\*"(recreated on next device connect). - Flush Windows Certificate Store URL cache:
certutil -urlcache * delete. - Restart services:
sc.exe start "Apple Mobile Device Service". - Reconnect device; trust prompt appears on device — accept. Retry sync.
Success Criteria: AMDS.log shows AMDeviceSecureStartService: CSP ValidateCertChain succeeded hr=0x0.
Phase 2: Terminal / Subsystem Pipeline Flush (Command-line Remediation)
- Repair Machine Key Container:
# Backup corrupted container $path = "C:\Users\All Users\Microsoft\Crypto\RSA\MachineKeys" $files = Get-ChildItem $path | Where-Object { $_ -match "AppleMobileDevice" } $files | Move-Item -Destination { "C:\Temp\CryptoBackup\$($_.Name)" } -Force # Force AMDS to regenerate container on next start sc.exe stop "Apple Mobile Device Service" sc.exe start "Apple Mobile Device Service" - Install/Update Apple Root CAs via Certutil (bypassing Group Policy):
# Download current Apple Root CA bundle (SHA-256 verified) Invoke-WebRequest "https://www.apple.com/certificateauthority/AppleRootCA-G3.cer" -OutFile "C:\Temp\AppleRootCA-G3.cer" $hash = Get-FileHash "C:\Temp\AppleRootCA-G3.cer" -Algorithm SHA256 if ($hash.Hash -ne "A8:3B:...expected...") { throw "Hash mismatch" } certutil -addstore -f "Root" "C:\Temp\AppleRootCA-G3.cer" # Verify in SYSTEM context psexec -i -s certutil -store Root | Select-String "Apple Root CA - G3" - Configure Revocation Check to “Best Effort” for AMDS only (Registry):
Set-ItemProperty -Path "HKLM:\SOFTWARE\Policies\Microsoft\SystemCertificates\Chain\ChainPolicy" -Name "EnableWeakSignatureFlags" -Value 0 -Type DWord -Force
# Create per-process override for AMDS (requires Windows 10 1809+)
New-Item -Path "HKLM:\SOFTWARE\Microsoft\Cryptography\OID\EncodingType 1\CertDllVerifyCertificateChainPolicy\1.3.6.1.5.5.7.3.1" -Force
Set-ItemProperty -
Share your exact OS build and Finder/Console snippet in the OS Updates & Error Codes forum room.