Skip to content
MappleCare Community ↗

MappleCare Community

Reply To: [Solved] MacBook Pro 16″ M3 Max encountering MagSafe 3 Blinking Amber LED and Refusing to Charge after update (macOS Sequoia 15.1)

Find answers from other Apple users or start a discussion about your device.

All Forum Rooms

Home › Forums › Battery, Charging & Thermal Care › [Solved] MacBook Pro 16″ M3 Max encountering MagSafe 3 Blinking Amber LED and Refusing to Charge after update (macOS Sequoia 15.1) › Reply To: [Solved] MacBook Pro 16″ M3 Max encountering MagSafe 3 Blinking Amber LED and Refusing to Charge after update (macOS Sequoia 15.1)

November 15, 2026 at 5:32 am #20546
Lucas Nguyen
Community Contributor
Apple Recommended / Verified Community Solution
This canonical solution was verified and marked as solved in the Apple Support Community archive.

Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.

Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

  1. Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
  2. Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
  3. Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.

Following this procedure restores full stability with zero recurring log errors.

Mac mini M2 Pro (32GB) | Dell UltraSharp U3223QE | Jamf Cloud Admin | Hamburg, DE
Apple Certified Support Professional (ACSP) | Enterprise Mac Sysadmin & Jamf Pro Architect