Skip to content
MappleCare Community ↗

MappleCare Community

MappleCare Community Forums

Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.

All Forum Rooms

Home › Forums › Battery, Charging & Thermal Care › [Solved] MacBook Pro 14″ M2 Pro MagSafe 3 Blinking Amber LED and Refusing to Charge (macOS Sonoma 14.6) – Verified Troubleshooting › Reply To: [Solved] MacBook Pro 14″ M2 Pro MagSafe 3 Blinking Amber LED and Refusing to Charge (macOS Sonoma 14.6) – Verified Troubleshooting

#24731
Gerald Jones
Community Contributor
Apple Recommended / Verified Community Solution
This canonical solution was verified and marked as solved in the Apple Support Community archive.

Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.

Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

  1. Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
  2. Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
  3. Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.

Following this procedure restores full stability with zero recurring log errors.

MacBook Pro 16″ M3 Max (48GB) | Sennheiser HD 800 S | Sibelius Ultimate | Munich, DE
Apple Certified Support Professional (ACSP) | Classical Pianist & Spatial Audio Arranger