Skip to content
MappleCareMappleCare Community ↗

MappleCare Community

MappleCare Community Forums

Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.

All Forum Rooms

Home › Forums › Battery, Charging & Thermal Care › [Solved] MagSafe 3 Blinking Amber LED and Refusing to Charge on macOS Sequoia 15.1: Diagnostic steps and permanent fix › Reply To: [Solved] MagSafe 3 Blinking Amber LED and Refusing to Charge on macOS Sequoia 15.1: Diagnostic steps and permanent fix

#41985
Kullanıcı ProfiliAndrew King
Community Contributor
Apple Recommended / Verified Community Solution
This canonical solution was verified and marked as solved in the Apple Support Community archive.

Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.

Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

  1. Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
  2. Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
  3. Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.

Following this procedure restores full stability with zero recurring log errors.

HomePod mini (Stereo Pair) | Apple TV 4K | iPad mini 7 (Wall Mounted) | Milan, IT
Apple Certified Support Professional (ACSP) | Smart Home & Matter/Thread Integrator