[Solved] AirPods Pro 2 encountering AirPods Pro 2 Static Noise in Earbud During ANC Mode after update (Firmware 7B19)

[Oliver Cruz]

Diagnostic Hardware Specs: AirPods Pro 2 (USB-C) | OS Version: Firmware 7B19 | Archive Source: Apple Support Community #256214855

I am running into a persistent issue on my AirPods Pro 2 (USB-C) running Firmware 7B19.
Whenever the machine encounters Acoustic debris clogging outer beamforming microphone mesh, the following diagnostic log appears in Console:

CoreAudio: [SpatialAudio] Phase cancellation feedback loop detected in Left transducer

I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

MacBook Pro 16″ M3 Max (64GB) | Studio Display | iPhone 16 Pro | Aarhus, DK

iOS / Swift Engineer | "Verified Apple Discussions Archive"

[Mark Mason]

Apple Recommended / Verified Community Solution

This canonical solution was verified and marked as solved in the Apple Support Community archive.

Deep cleaning outer black microphone mesh using dry adhesive putty and performing 15-second case reset.

Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

1. Remove silicone ear tip. Press dry Blu-Tack adhesive putty firmly against the outer oval microphone grilles and pull away sharply.
2. Place AirPods in case, close lid 30s. Open lid, hold back button for 15s until LED flashes amber, then white.
3. Re-pair with iPhone. If noise persists, visit Apple Store for acoustic fixture testing.

Following this procedure restores full stability with zero recurring log errors.

MacBook Pro 14″ M4 Pro (48GB) | iPhone 15 Pro | iPad Air M2 | Milan, IT

Apple Certified Support Professional (ACSP) | iOS / Swift Engineer

[Author]

Posts