Skip to content
MappleCare Community ↗
Solved Question Apple Watch & AirPods

[Solved] AirPods Pro 2 Static Noise in Earbud During ANC Mode on AirPods Pro 2: How to resolve Acoustic debris clogging outer beamforming microphone mesh

Started by Linnea Porter • November 15, 2026 at 3:54 pm • 1 Community Replies • 2 Participants

Home › Forums › Apple Watch & AirPods › [Solved] AirPods Pro 2 Static Noise in Earbud During ANC Mode on AirPods Pro 2: How to resolve Acoustic debris clogging outer beamforming microphone mesh

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #29763
    Linnea Porter
    Community Contributor
    Diagnostic Hardware Specs: AirPods Pro 2 (USB-C) | OS Version: iOS 18.1 | Archive Source: Apple Support Community #256363255

    I am running into a persistent issue on my AirPods Pro 2 (USB-C) running iOS 18.1.
    Whenever the machine encounters Acoustic debris clogging outer beamforming microphone mesh, the following diagnostic log appears in Console:

    CoreAudio: [SpatialAudio] Phase cancellation feedback loop detected in Left transducer

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 16″ M1 Max (64GB, Workhorse) | Dell U3224KB | Copenhagen, Denmark
    Enterprise Jamf & MDM Admin | "Verified Apple Discussions Archive"
    #29764
    Julian Pearson
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Deep cleaning outer black microphone mesh using dry adhesive putty and performing 15-second case reset.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Remove silicone ear tip. Press dry Blu-Tack adhesive putty firmly against the outer oval microphone grilles and pull away sharply.
    2. Place AirPods in case, close lid 30s. Open lid, hold back button for 15s until LED flashes amber, then white.
    3. Re-pair with iPhone. If noise persists, visit Apple Store for acoustic fixture testing.

    Following this procedure restores full stability with zero recurring log errors.

    iMac 24″ M4 (32GB, Orange) | AirPods Max USB-C | Singapore
    Apple Certified Support Professional (ACSP) | Enterprise Jamf & MDM Admin
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.