Skip to content
MappleCare Community ↗
Solved Question iPad & iPadOS Support

[Solved] Apple Pencil Pro Squeeze & Hover Gesture Failure on iPad Air 11″ M2: How to resolve Digitizer sensor BLE calibration handshake desynchronization

Started by Florian West • November 15, 2026 at 10:21 pm • 1 Community Replies • 2 Participants

Home › Forums › iPad & iPadOS Support › [Solved] Apple Pencil Pro Squeeze & Hover Gesture Failure on iPad Air 11″ M2: How to resolve Digitizer sensor BLE calibration handshake desynchronization

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #34674
    Florian West
    Community Contributor
    Diagnostic Hardware Specs: iPad Air 11″ M2 | OS Version: iPadOS 18.0.1 | Archive Source: Apple Support Community #256345497

    I am running into a persistent issue on my iPad Air 11″ M2 running iPadOS 18.0.1.
    Whenever the machine encounters Digitizer sensor BLE calibration handshake desynchronization, the following diagnostic log appears in Console:

    PencilService: [Bluetooth] Haptic squeeze sensor payload CRC mismatch on peripheral 0xd87a

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Mac Pro 2023 M2 Ultra (192GB) | Promise Pegasus R8 | Auckland, New Zealand
    Audio Unit & CoreAudio Architect | "Verified Apple Discussions Archive"
    #34675
    Nicole Werner
    Senior Specialist (Lvl 8)
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
    2. Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
    3. Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.

    Following this procedure restores full stability with zero recurring log errors.

    iMac 24″ M3 (16GB) | AST 2 Diagnostic Station | ESD Workstation | Vancouver, BC
    Apple Certified Support Professional (ACSP) | Apple Certified Service Technician (ACiT / ACSP)
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.