Skip to content
[Solved] Apple Pencil Pro Squeeze & Hover Gesture Failure on iPad Pro 11″ M4: How to resolve Digitizer sensor BLE calibration handshake desynchronizationMappleCare Community ↗
Solved Question iPad & iPadOS Support

[Solved] Apple Pencil Pro Squeeze & Hover Gesture Failure on iPad Pro 11″ M4: How to resolve Digitizer sensor BLE calibration handshake desynchronization

Started by Wesley Hudson • November 17, 2026 at 12:07 am • 1 Community Replies • 2 Participants

Home › Forums › iPad & iPadOS Support › [Solved] Apple Pencil Pro Squeeze & Hover Gesture Failure on iPad Pro 11″ M4: How to resolve Digitizer sensor BLE calibration handshake desynchronization

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #54104
    Kullanıcı ProfiliWesley Hudson
    Community Contributor
    Diagnostic Hardware Specs: iPad Pro 11″ M4 | OS Version: iPadOS 18.0.1 | Archive Source: Apple Support Community #256764924

    I am running into a persistent issue on my iPad Pro 11″ M4 running iPadOS 18.0.1.
    Whenever the machine encounters Digitizer sensor BLE calibration handshake desynchronization, the following diagnostic log appears in Console:

    PencilService: [Bluetooth] Haptic squeeze sensor payload CRC mismatch on peripheral 0x9d28

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    iMac 24″ M4 (32GB, Orange) | AirPods Max USB-C | Denver, CO
    Swift Concurrency Engineer | "Verified Apple Discussions Archive"
    #54105
    Kullanıcı ProfiliBenjamin Walsh
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
    2. Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
    3. Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M3 Ultra (192GB) | Pro Display XDR 6K | Boston, MA
    Apple Certified Support Professional (ACSP) | Swift Concurrency Engineer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.