Skip to content
[Solved] Apple Pencil Pro Squeeze & Hover Gesture Failure on iPadOS 18.1: Diagnostic steps and permanent fixMappleCare Community ↗
Solved Question iPad & iPadOS Support

[Solved] Apple Pencil Pro Squeeze & Hover Gesture Failure on iPadOS 18.1: Diagnostic steps and permanent fix

Started by Angela Williams • November 17, 2026 at 2:12 am • 1 Community Replies • 2 Participants

Home › Forums › iPad & iPadOS Support › [Solved] Apple Pencil Pro Squeeze & Hover Gesture Failure on iPadOS 18.1: Diagnostic steps and permanent fix

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #56203
    Kullanıcı ProfiliAngela Williams
    Community Contributor
    Diagnostic Hardware Specs: iPad Air 11″ M2 | OS Version: iPadOS 18.1 | Archive Source: Apple Support Community #256816506

    I am running into a persistent issue on my iPad Air 11″ M2 running iPadOS 18.1.
    Whenever the machine encounters Digitizer sensor BLE calibration handshake desynchronization, the following diagnostic log appears in Console:

    PencilService: [Bluetooth] Haptic squeeze sensor payload CRC mismatch on peripheral 0x26f5

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    iMac 24″ M3 (16GB) | Kawai MP11SE Stage Piano | AirPods Max | Singapore
    Classical Pianist & Spatial Audio Arranger | "Verified Apple Discussions Archive"
    #56204
    Kullanıcı ProfiliAustin Wells
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
    2. Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
    3. Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Air 15″ M3 (16GB) | LG 27UK850 | Sony WH-1000XM5 | Antwerp, BE
    Apple Certified Support Professional (ACSP) | Computer Science & Machine Learning Student
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.