Skip to content
[Solved] Apple Pencil Pro Squeeze & Hover Gesture Failure on iPadOS 18.1: Diagnostic steps and permanent fixMappleCare Community ↗
Solved Question iPad & iPadOS Support

[Solved] Apple Pencil Pro Squeeze & Hover Gesture Failure on iPadOS 18.1: Diagnostic steps and permanent fix

Started by Joseph Simmons • November 17, 2026 at 11:53 am • 1 Community Replies • 2 Participants

Home › Forums › iPad & iPadOS Support › [Solved] Apple Pencil Pro Squeeze & Hover Gesture Failure on iPadOS 18.1: Diagnostic steps and permanent fix

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #65885
    Kullanıcı ProfiliJoseph Simmons
    Community Contributor
    Diagnostic Hardware Specs: iPad Pro 13″ M4 | OS Version: iPadOS 18.1 | Archive Source: Apple Support Community #256064208

    I am running into a persistent issue on my iPad Pro 13″ M4 running iPadOS 18.1.
    Whenever the machine encounters Digitizer sensor BLE calibration handshake desynchronization, the following diagnostic log appears in Console:

    PencilService: [Bluetooth] Haptic squeeze sensor payload CRC mismatch on peripheral 0xf4ce

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 14″ M3 Max (36GB) | BenQ SW321C 4K | Montreal, QC
    Swift Concurrency Engineer | "Verified Apple Discussions Archive"
    #65886
    Kullanıcı ProfiliHao Lee
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
    2. Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
    3. Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.

    Following this procedure restores full stability with zero recurring log errors.

    iPad mini 7 A17 Pro (512GB) | Smart Folio | Tokyo, Japan
    Apple Certified Support Professional (ACSP) | Pro Audio Recording Engineer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.