Skip to content
[Solved] Apple TV 4K Apple TV 4K eARC Audio Dropouts with Soundbar / AVR (tvOS 18.1) – Verified TroubleshootingMappleCare Community ↗

[Solved] Apple TV 4K Apple TV 4K eARC Audio Dropouts with Soundbar / AVR (tvOS 18.1) – Verified Troubleshooting

Started by Nicole Alvarez • November 16, 2026 at 7:07 pm • 1 Community Replies • 2 Participants

Home › Forums › HomeKit, Apple TV & Smart Home › [Solved] Apple TV 4K Apple TV 4K eARC Audio Dropouts with Soundbar / AVR (tvOS 18.1) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #48971
    Kullanıcı ProfiliNicole Alvarez
    Community Contributor
    Diagnostic Hardware Specs: Apple TV 4K (2nd Gen) | OS Version: tvOS 18.1 | Archive Source: Apple Support Community #256445108

    I am running into a persistent issue on my Apple TV 4K (2nd Gen) running tvOS 18.1.
    Whenever the machine encounters HDMI 2.1 eARC bandwidth handshake failure and Dolby Atmos MAT audio payload truncation, the following diagnostic log appears in Console:

    audiouxd: [AudioFormat] eARC stream packet overflow: dropping Dolby Atmos metadata frame at 0xcb7d

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 14″ M4 (24GB) | iPad Air M2 | Keychron Q1 Pro | Barcelona, ES
    Computer Science & Machine Learning Student | "Verified Apple Discussions Archive"
    #48972
    Kullanıcı ProfiliLucas Collins
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Replacing with certified 48Gbps Ultra High Speed HDMI cable and verifying eARC pass-through mode.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Ensure HDMI cable is certified Ultra High Speed 48Gbps (HDMI 2.1); 18Gbps cables will dropout during Atmos MAT transmission.
    2. In tvOS Settings > Video and Audio > Audio Output, set Audio Format to Auto, Dolby Atmos.
    3. In TV HDMI CEC settings, ensure eARC is set to Pass-through / Bitstream, not PCM stereo.

    Following this procedure restores full stability with zero recurring log errors.

    Apple Vision Pro (512GB) | MacBook Pro 16″ M3 Max | Magic Trackpad | Seattle, WA
    Apple Certified Support Professional (ACSP) | visionOS Spatial Computing Developer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.