Skip to content
MappleCare Community ↗

[Solved] Apple TV 4K eARC Audio Dropouts with Soundbar / AVR on Apple TV 4K: How to resolve HDMI 2.1 eARC bandwidth handshake failure and Dolby Atmos MAT audio payload truncation

Started by Susan Kim • November 15, 2026 at 12:15 pm • 1 Community Replies • 2 Participants

Home › Forums › HomeKit, Apple TV & Smart Home › [Solved] Apple TV 4K eARC Audio Dropouts with Soundbar / AVR on Apple TV 4K: How to resolve HDMI 2.1 eARC bandwidth handshake failure and Dolby Atmos MAT audio payload truncation

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #26505
    Susan Kim
    Community Contributor
    Diagnostic Hardware Specs: Apple TV 4K (3rd Gen) | OS Version: tvOS 18.1 | Archive Source: Apple Support Community #256584386

    I am running into a persistent issue on my Apple TV 4K (3rd Gen) running tvOS 18.1.
    Whenever the machine encounters HDMI 2.1 eARC bandwidth handshake failure and Dolby Atmos MAT audio payload truncation, the following diagnostic log appears in Console:

    audiouxd: [AudioFormat] eARC stream packet overflow: dropping Dolby Atmos metadata frame at 0xa8e2

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Apple Vision Pro (512GB) | MacBook Pro 16″ M3 Max | Magic Trackpad | Milan, IT
    visionOS Spatial Computing Developer | "Verified Apple Discussions Archive"
    #26506
    Isabella Marshall
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Replacing with certified 48Gbps Ultra High Speed HDMI cable and verifying eARC pass-through mode.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Ensure HDMI cable is certified Ultra High Speed 48Gbps (HDMI 2.1); 18Gbps cables will dropout during Atmos MAT transmission.
    2. In tvOS Settings > Video and Audio > Audio Output, set Audio Format to Auto, Dolby Atmos.
    3. In TV HDMI CEC settings, ensure eARC is set to Pass-through / Bitstream, not PCM stereo.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Air 13″ M3 (16GB) | Apple GSX Terminal | Thermal Camera Seek Compact | Oslo, NO
    Apple Certified Support Professional (ACSP) | Apple Certified Service Technician (ACiT / ACSP)
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.