Skip to content
[Solved] Apple TV 4K eARC Audio Dropouts with Soundbar / AVR on tvOS 18.1: Diagnostic steps and permanent fixMappleCare Community ↗

[Solved] Apple TV 4K eARC Audio Dropouts with Soundbar / AVR on tvOS 18.1: Diagnostic steps and permanent fix

Started by Jacqueline Brown • November 16, 2026 at 10:24 pm • 1 Community Replies • 2 Participants

Home › Forums › HomeKit, Apple TV & Smart Home › [Solved] Apple TV 4K eARC Audio Dropouts with Soundbar / AVR on tvOS 18.1: Diagnostic steps and permanent fix

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #52356
    Kullanıcı ProfiliJacqueline Brown
    Community Contributor
    Diagnostic Hardware Specs: Apple TV 4K (2nd Gen) | OS Version: tvOS 18.1 | Archive Source: Apple Support Community #256088164

    I am running into a persistent issue on my Apple TV 4K (2nd Gen) running tvOS 18.1.
    Whenever the machine encounters HDMI 2.1 eARC bandwidth handshake failure and Dolby Atmos MAT audio payload truncation, the following diagnostic log appears in Console:

    audiouxd: [AudioFormat] eARC stream packet overflow: dropping Dolby Atmos metadata frame at 0x43ad

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 16″ M3 Max (64GB) | Tether Tools Pro | SanDisk Extreme Pro 4TB | Boulder, CO
    Commercial Photographer & Digitech | "Verified Apple Discussions Archive"
    #52357
    Kullanıcı ProfiliJose Peterson
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Replacing with certified 48Gbps Ultra High Speed HDMI cable and verifying eARC pass-through mode.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Ensure HDMI cable is certified Ultra High Speed 48Gbps (HDMI 2.1); 18Gbps cables will dropout during Atmos MAT transmission.
    2. In tvOS Settings > Video and Audio > Audio Output, set Audio Format to Auto, Dolby Atmos.
    3. In TV HDMI CEC settings, ensure eARC is set to Pass-through / Bitstream, not PCM stereo.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 16″ M3 Max (48GB) | Sennheiser HD 800 S | Sibelius Ultimate | Oslo, NO
    Apple Certified Support Professional (ACSP) | Classical Pianist & Spatial Audio Arranger
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.