Skip to content
MappleCare Community ↗

[Solved] Apple TV 4K encountering Apple TV 4K eARC Audio Dropouts with Soundbar / AVR after update (tvOS 18.1)

Started by Stephanie Sullivan • November 15, 2026 at 12:59 pm • 1 Community Replies • 2 Participants

Home › Forums › HomeKit, Apple TV & Smart Home › [Solved] Apple TV 4K encountering Apple TV 4K eARC Audio Dropouts with Soundbar / AVR after update (tvOS 18.1)

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #27136
    Stephanie Sullivan
    Community Contributor
    Diagnostic Hardware Specs: Apple TV 4K (2nd Gen) | OS Version: tvOS 18.1 | Archive Source: Apple Support Community #256268295

    I am running into a persistent issue on my Apple TV 4K (2nd Gen) running tvOS 18.1.
    Whenever the machine encounters HDMI 2.1 eARC bandwidth handshake failure and Dolby Atmos MAT audio payload truncation, the following diagnostic log appears in Console:

    audiouxd: [AudioFormat] eARC stream packet overflow: dropping Dolby Atmos metadata frame at 0xe2a4

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 16″ M2 Max (96GB) | Pro Display XDR | iPhone 16 Pro | San Jose, CA
    iOS / Swift Engineer | "Verified Apple Discussions Archive"
    #27137
    Robert Morris
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Replacing with certified 48Gbps Ultra High Speed HDMI cable and verifying eARC pass-through mode.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Ensure HDMI cable is certified Ultra High Speed 48Gbps (HDMI 2.1); 18Gbps cables will dropout during Atmos MAT transmission.
    2. In tvOS Settings > Video and Audio > Audio Output, set Audio Format to Auto, Dolby Atmos.
    3. In TV HDMI CEC settings, ensure eARC is set to Pass-through / Bitstream, not PCM stereo.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Air 15″ M2 (16GB) | Glyph Atom Pro 2TB | iPhone 16 Pro Max | Boston, MA
    Apple Certified Support Professional (ACSP) | Commercial Photographer & Digitech
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.