MappleCare Community
[Solved] Apple Vision Pro 1TB + Mac Studio M2 Ultra Mac Virtual Display Ultra-Wide Mode Connection Dropping (visionOS 2.0 + macOS Sequoia 15.0.1) – Verified Troubleshooting
Find answers from other Apple users or start a discussion about your device.
Home › Forums › Apple Vision Pro & visionOS › [Solved] Apple Vision Pro 1TB + Mac Studio M2 Ultra Mac Virtual Display Ultra-Wide Mode Connection Dropping (visionOS 2.0 + macOS Sequoia 15.0.1) – Verified Troubleshooting
- This topic has 1 reply, 2 voices, and was last updated 1 hour, 36 minutes ago by
Stephanie Murray.
-
AuthorPosts
-
November 15, 2026 at 1:19 am #16452
Kenneth Hayes
Community ContributorDiagnostic Hardware Specs: Apple Vision Pro 1TB + Mac Studio M2 Ultra | OS Version: visionOS 2.0 + macOS Sequoia 15.0.1 | Archive Source: Apple Support Community #256771357I am running into a persistent issue on my Apple Vision Pro 1TB + Mac Studio M2 Ultra running visionOS 2.0 + macOS Sequoia 15.0.1.
Whenever the machine encounters AWDL (Apple Wireless Direct Link) 5GHz channel interference and peer packet drop, the following diagnostic log appears in Console:SpatialSharing: [com.apple.airplay.virtualdisplay] AWDL peer link drop - retry timeout exceeded on interface awdl0I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?
Mac mini M4 Pro (64GB) | MOTU 828es | Logic Pro 11 | Focal Shape 65 | Porto, PTLogic Pro Audio Producer & Mixing Engineer | "Verified Apple Discussions Archive"November 15, 2026 at 1:19 am #16453Stephanie Murray
Community ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Locking Wi-Fi to a dedicated 5GHz/6GHz SSID, toggling AirPlay Receiver, and renewing Handoff tokens.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Ensure both Mac and Vision Pro are connected to the exact same 5GHz/6GHz Wi-Fi band without band-steering.
- On Mac, open System Settings > General > AirPlay & Continuity and toggle AirPlay Receiver off and on.
- In visionOS Control Center, bring Mac Virtual Display window within 2 meters, select Connect, and set resolution to Ultra-Wide (4K equivalent).
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 14″ M4 (24GB) | DJI Mic 2 | Anker Prime 27,650mAh Bank | Kyoto, JPApple Certified Support Professional (ACSP) | Digital Nomad & Travel Filmmaker -
AuthorPosts
- You must be logged in to reply to this topic.