Skip to content
MappleCare Community ↗

MappleCare Community

[Solved] Apple Vision Pro 512GB + MacBook Pro 16″ M3 Max encountering Mac Virtual Display Ultra-Wide Mode Connection Dropping after update (visionOS 2.1 + macOS Sequoia 15.1)

Find answers from other Apple users or start a discussion about your device.

All Forum Rooms

Home › Forums › Apple Vision Pro & visionOS › [Solved] Apple Vision Pro 512GB + MacBook Pro 16″ M3 Max encountering Mac Virtual Display Ultra-Wide Mode Connection Dropping after update (visionOS 2.1 + macOS Sequoia 15.1)

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #9306
    Owen Parker
    Apple Master (Lvl 10)
    Diagnostic Hardware Specs: Apple Vision Pro 512GB + MacBook Pro 16″ M3 Max | OS Version: visionOS 2.1 + macOS Sequoia 15.1 | Archive Source: Apple Support Community #256507453

    I am running into a persistent issue on my Apple Vision Pro 512GB + MacBook Pro 16″ M3 Max running visionOS 2.1 + macOS Sequoia 15.1.
    Whenever the machine encounters AWDL (Apple Wireless Direct Link) 5GHz channel interference and peer packet drop, the following diagnostic log appears in Console:

    SpatialSharing: [com.apple.airplay.virtualdisplay] AWDL peer link drop - retry timeout exceeded on interface awdl0

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Apple Vision Pro 512GB + MacBook Pro 16″ M3 Max | visionOS 2.1 + macOS Sequoia 15.1
    Apple Discussions Contributor | "Verified Apple Diagnostics Archive"
    #9307
    Liam O’Connor
    Lead Moderator
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking Wi-Fi to a dedicated 5GHz/6GHz SSID, toggling AirPlay Receiver, and renewing Handoff tokens.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Ensure both Mac and Vision Pro are connected to the exact same 5GHz/6GHz Wi-Fi band without band-steering.
    2. On Mac, open System Settings > General > AirPlay & Continuity and toggle AirPlay Receiver off and on.
    3. In visionOS Control Center, bring Mac Virtual Display window within 2 meters, select Connect, and set resolution to Ultra-Wide (4K equivalent).

    Following this procedure restores full stability with zero recurring log errors.

    Apple Certified Support Professional (ACSP)
    Cupertino, CA | "Precision Apple Diagnostics"
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.