Skip to content
MappleCare Community ↗

MappleCare Community

[Solved] Apple Vision Pro 512GB + MacBook Pro 16″ M3 Max Mac Virtual Display Ultra-Wide Mode Connection Dropping (visionOS 2.0 + macOS Sequoia 15.0.1) – Verified Troubleshooting

Find answers from other Apple users or start a discussion about your device.

All Forum Rooms

Home › Forums › Apple Vision Pro & visionOS › [Solved] Apple Vision Pro 512GB + MacBook Pro 16″ M3 Max Mac Virtual Display Ultra-Wide Mode Connection Dropping (visionOS 2.0 + macOS Sequoia 15.0.1) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #13487
    Angela Williams
    Community Contributor
    Diagnostic Hardware Specs: Apple Vision Pro 512GB + MacBook Pro 16″ M3 Max | OS Version: visionOS 2.0 + macOS Sequoia 15.0.1 | Archive Source: Apple Support Community #256201924

    I am running into a persistent issue on my Apple Vision Pro 512GB + MacBook Pro 16″ M3 Max running visionOS 2.0 + macOS Sequoia 15.0.1.
    Whenever the machine encounters AWDL (Apple Wireless Direct Link) 5GHz channel interference and peer packet drop, the following diagnostic log appears in Console:

    SpatialSharing: [com.apple.airplay.virtualdisplay] AWDL peer link drop - retry timeout exceeded on interface awdl0

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    iMac 24″ M3 (16GB) | Kawai MP11SE Stage Piano | AirPods Max | Singapore
    Classical Pianist & Spatial Audio Arranger | "Verified Apple Discussions Archive"
    #13488
    Sean Braun
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking Wi-Fi to a dedicated 5GHz/6GHz SSID, toggling AirPlay Receiver, and renewing Handoff tokens.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Ensure both Mac and Vision Pro are connected to the exact same 5GHz/6GHz Wi-Fi band without band-steering.
    2. On Mac, open System Settings > General > AirPlay & Continuity and toggle AirPlay Receiver off and on.
    3. In visionOS Control Center, bring Mac Virtual Display window within 2 meters, select Connect, and set resolution to Ultra-Wide (4K equivalent).

    Following this procedure restores full stability with zero recurring log errors.

    Mac Pro M2 Ultra | Dual Pro Display XDR | Blackmagic UltraStudio 4K Mini | Hamburg, DE
    Apple Certified Support Professional (ACSP) | Final Cut Pro / DaVinci Colorist & Editor
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.