Skip to content
[Solved] Camera Control Button Accidental Palm Activations on iOS 18.0.1: Diagnostic steps and permanent fixMappleCare Community ↗
Solved Question iPhone & iOS Help Desk

[Solved] Camera Control Button Accidental Palm Activations on iOS 18.0.1: Diagnostic steps and permanent fix

Started by Warren Cole • November 17, 2026 at 1:32 pm • 1 Community Replies • 2 Participants

Home › Forums › iPhone & iOS Help Desk › [Solved] Camera Control Button Accidental Palm Activations on iOS 18.0.1: Diagnostic steps and permanent fix

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #67375
    Kullanıcı ProfiliWarren Cole
    Community Contributor
    Diagnostic Hardware Specs: iPhone 16 Pro | OS Version: iOS 18.0.1 | Archive Source: Apple Support Community #256223425

    I am running into a persistent issue on my iPhone 16 Pro running iOS 18.0.1.
    Whenever the machine encounters Capacitive sensor threshold over-sensitivity in one-handed grip, the following diagnostic log appears in Console:

    CoreMotion: [CameraControl] Pressure register 0xb1b2 registered threshold exceedance in portrait hold

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Mac Studio M2 Max (64GB) | LG UltraFine 5K | London, UK
    HomeKit / Matter IoT Integrator | "Verified Apple Discussions Archive"
    #67376
    Kullanıcı ProfiliSamantha Webb
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Tuning force pressure settings to Firmer and changing launch trigger from Single Click to Double Click.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Go to Settings > Accessibility > Camera Control. Change Pressure and Light Press Sensitivity to Firmer.
    2. In Settings > Camera > Camera Control, change Launch Camera to Double Click.
    3. Disable swipe gesture adjustments if exposure sliding is not required.

    Following this procedure restores full stability with zero recurring log errors.

    Mac mini M4 (16GB) Home Server | Apple TV 4K | Eve Energy Thread Mesh | Porto, PT
    Apple Certified Support Professional (ACSP) | Smart Home & Matter/Thread Integrator
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.