Skip to content
[Solved] External Display Flickering at High Refresh Rates on Mac mini M4 Pro: How to resolve DSC compression and VRR handshake failure over USB-C DisplayPortMappleCare Community ↗

[Solved] External Display Flickering at High Refresh Rates on Mac mini M4 Pro: How to resolve DSC compression and VRR handshake failure over USB-C DisplayPort

Started by Angela Rodriguez • November 18, 2026 at 11:01 am • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] External Display Flickering at High Refresh Rates on Mac mini M4 Pro: How to resolve DSC compression and VRR handshake failure over USB-C DisplayPort

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #88391
    Kullanıcı ProfiliAngela Rodriguez
    Certified Tech (Lvl 5)
    Diagnostic Hardware Specs: Mac mini M4 Pro | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256140492

    I am running into a persistent issue on my Mac mini M4 Pro running macOS Sequoia 15.1.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0x138c link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 14″ M4 (24GB) | iPad Air M2 | Keychron Q1 Pro | Gothenburg, SE
    Computer Science & Machine Learning Student | "Verified Apple Discussions Archive"
    #88392
    Kullanıcı ProfiliMark Mason
    Senior Specialist (Lvl 8)
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 14″ M4 Pro (48GB) | iPhone 15 Pro | iPad Air M2 | Milan, IT
    Apple Certified Support Professional (ACSP) | iOS / Swift Engineer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.