Skip to content
[Solved] External Display Flickering at High Refresh Rates on Mac Studio M2 Ultra: How to resolve DSC compression and VRR handshake failure over USB-C DisplayPortMappleCare Community ↗

[Solved] External Display Flickering at High Refresh Rates on Mac Studio M2 Ultra: How to resolve DSC compression and VRR handshake failure over USB-C DisplayPort

Started by Edward Lloyd • November 16, 2026 at 7:59 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] External Display Flickering at High Refresh Rates on Mac Studio M2 Ultra: How to resolve DSC compression and VRR handshake failure over USB-C DisplayPort

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #49875
    Kullanıcı ProfiliEdward Lloyd
    Community Contributor
    Diagnostic Hardware Specs: Mac Studio M2 Ultra | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256840958

    I am running into a persistent issue on my Mac Studio M2 Ultra running macOS Sequoia 15.1.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0xd97d link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    iPhone 16 Pro (512GB) | AirPods Pro 2 (USB-C) | Zurich, Switzerland
    Audio Unit & CoreAudio Architect | "Verified Apple Discussions Archive"
    #49876
    Kullanıcı ProfiliElliott Murray
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M2 Max (64GB) | LG UltraFine 5K | Melbourne, VIC
    Apple Certified Support Professional (ACSP) | Metal 3 Graphics Pipeline Dev
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.