Skip to content
[Solved] External Display Flickering at High Refresh Rates on Mac Studio M2 Ultra: How to resolve DSC compression and VRR handshake failure over USB-C DisplayPortMappleCare Community ↗

[Solved] External Display Flickering at High Refresh Rates on Mac Studio M2 Ultra: How to resolve DSC compression and VRR handshake failure over USB-C DisplayPort

Started by Amelia Ward • November 19, 2026 at 5:13 am • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] External Display Flickering at High Refresh Rates on Mac Studio M2 Ultra: How to resolve DSC compression and VRR handshake failure over USB-C DisplayPort

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #104962
    Kullanıcı ProfiliAmelia Ward
    Community Contributor
    Diagnostic Hardware Specs: Mac Studio M2 Ultra | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256601299

    I am running into a persistent issue on my Mac Studio M2 Ultra running macOS Sequoia 15.1.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0x72d0 link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | London, UK
    Apple Silicon Architecture Lead | "Verified Apple Discussions Archive"
    #104963
    Kullanıcı ProfiliDeborah Barnes
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    Apple Vision Pro (1TB) | Mac Studio M2 Max (64GB) | AirPods Max USB-C | Salt Lake City, UT
    Apple Certified Support Professional (ACSP) | visionOS Spatial Computing Developer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.