Skip to content
[Solved] External Display Flickering at High Refresh Rates on MacBook Pro 14″ M1 Max: How to resolve DSC compression and VRR handshake failure over USB-C DisplayPortMappleCare Community ↗

[Solved] External Display Flickering at High Refresh Rates on MacBook Pro 14″ M1 Max: How to resolve DSC compression and VRR handshake failure over USB-C DisplayPort

Started by Sebastian Burns • November 16, 2026 at 10:14 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] External Display Flickering at High Refresh Rates on MacBook Pro 14″ M1 Max: How to resolve DSC compression and VRR handshake failure over USB-C DisplayPort

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #52180
    Kullanıcı ProfiliSebastian Burns
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 14″ M1 Max | OS Version: macOS Sequoia 15.0.1 | Archive Source: Apple Support Community #256746525

    I am running into a persistent issue on my MacBook Pro 14″ M1 Max running macOS Sequoia 15.0.1.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0x7136 link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Mac mini M4 (16GB) Home Server | Apple TV 4K | Eve Energy Thread Mesh | San Diego, CA
    Smart Home & Matter/Thread Integrator | "Verified Apple Discussions Archive"
    #52181
    Kullanıcı ProfiliMaxwell Hunter
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M3 Ultra (192GB) | Pro Display XDR 6K | Dublin, Ireland
    Apple Certified Support Professional (ACSP) | Enterprise Jamf & MDM Admin
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.