Skip to content
MappleCare Community ↗

MappleCare Community

[Solved] External Display Flickering at High Refresh Rates on MacBook Pro 16″ M3 Pro: How to resolve DSC compression and VRR handshake failure over USB-C DisplayPort

Find answers from other Apple users or start a discussion about your device.

All Forum Rooms

Home › Forums › MacBook, iMac & macOS Lab › [Solved] External Display Flickering at High Refresh Rates on MacBook Pro 16″ M3 Pro: How to resolve DSC compression and VRR handshake failure over USB-C DisplayPort

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #20593
    Evelyn Hartmann
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 16″ M3 Pro | OS Version: macOS Sonoma 14.7 | Archive Source: Apple Support Community #256029254

    I am running into a persistent issue on my MacBook Pro 16″ M3 Pro running macOS Sonoma 14.7.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0x6f30 link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Mac Pro M2 Ultra | Dual Pro Display XDR | Blackmagic UltraStudio 4K Mini | Atlanta, GA
    Final Cut Pro / DaVinci Colorist & Editor | "Verified Apple Discussions Archive"
    #20594
    Victoria Harrison
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 14″ M2 Max (32GB) | Pro Display XDR | iPad Pro 13″ M4 | Lyon, FR
    Apple Certified Support Professional (ACSP) | Product Designer & Design Systems Lead
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.