Skip to content
[Solved] External Display Flickering at High Refresh Rates on MacBook Pro 16″ M3 Pro: How to resolve DSC compression and VRR handshake failure over USB-C DisplayPortMappleCare Community ↗

[Solved] External Display Flickering at High Refresh Rates on MacBook Pro 16″ M3 Pro: How to resolve DSC compression and VRR handshake failure over USB-C DisplayPort

Started by Abigail Gray • November 18, 2026 at 9:18 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] External Display Flickering at High Refresh Rates on MacBook Pro 16″ M3 Pro: How to resolve DSC compression and VRR handshake failure over USB-C DisplayPort

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #97797
    Kullanıcı ProfiliAbigail Gray
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 16″ M3 Pro | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256404786

    I am running into a persistent issue on my MacBook Pro 16″ M3 Pro running macOS Sequoia 15.1.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0xc44d link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Mac Studio M3 Ultra (192GB) | Pro Display XDR 6K | Melbourne, VIC
    WebKit / Safari Optimization Dev | "Verified Apple Discussions Archive"
    #97798
    Kullanıcı ProfiliJeremy Owen
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 14″ M3 Max (36GB) | BenQ SW321C 4K | San Francisco, CA
    Apple Certified Support Professional (ACSP) | Pro Audio Recording Engineer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.