Skip to content
MappleCare Community ↗

[Solved] External Display Flickering at High Refresh Rates on macOS Sequoia 15.1: Diagnostic steps and permanent fix

Started by Tobias Simpson • November 16, 2026 at 2:37 am • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] External Display Flickering at High Refresh Rates on macOS Sequoia 15.1: Diagnostic steps and permanent fix

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #37191
    Tobias Simpson
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 14″ M1 Max | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256118086

    I am running into a persistent issue on my MacBook Pro 14″ M1 Max running macOS Sequoia 15.1.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0xe24f link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | Manchester, UK
    CoreML & On-Device AI Researcher | "Verified Apple Discussions Archive"
    #37192
    James Collins
    Certified Tech (Lvl 5)
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M2 Max (32GB) | Dual LG UltraFine 5K | iPhone 16 Pro Max | Wellington, NZ
    Apple Certified Support Professional (ACSP) | iOS / Swift Engineer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.