Skip to content
MappleCare Community ↗

MappleCare Community

[Solved] External Display Flickering at High Refresh Rates on macOS Sequoia 15.1: Diagnostic steps and permanent fix

Find answers from other Apple users or start a discussion about your device.

All Forum Rooms

Home › Forums › MacBook, iMac & macOS Lab › [Solved] External Display Flickering at High Refresh Rates on macOS Sequoia 15.1: Diagnostic steps and permanent fix

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 14, 2026 at 9:29 pm #12645
    Theo Moore
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 14″ M1 Max | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256689987

    I am running into a persistent issue on my MacBook Pro 14″ M1 Max running macOS Sequoia 15.1.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0x9653 link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Mac mini M2 (24GB) | Apple Technician Guide Hub | Fluke 87V DMM | Porto, PT
    Apple Certified Service Technician (ACiT / ACSP) | "Verified Apple Discussions Archive"
    November 14, 2026 at 9:29 pm #12646
    Susan Reyes
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences: 
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M2 Max (32GB) | EIZO ColorEdge CG279X | Wacom Intuos Pro | Gothenburg, SE
    Apple Certified Support Professional (ACSP) | Commercial Photographer & Digitech
  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.