Skip to content
[Solved] External Display Flickering at High Refresh Rates on macOS Sonoma 14.7: Diagnostic steps and permanent fixMappleCare Community ↗

[Solved] External Display Flickering at High Refresh Rates on macOS Sonoma 14.7: Diagnostic steps and permanent fix

Started by James Stewart • November 16, 2026 at 8:50 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] External Display Flickering at High Refresh Rates on macOS Sonoma 14.7: Diagnostic steps and permanent fix

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #50763
    Kullanıcı ProfiliJames Stewart
    Community Contributor
    Diagnostic Hardware Specs: Mac Studio M2 Ultra | OS Version: macOS Sonoma 14.7 | Archive Source: Apple Support Community #256792411

    I am running into a persistent issue on my Mac Studio M2 Ultra running macOS Sonoma 14.7.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0xe1c3 link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 16″ M1 Max (64GB, Workhorse) | Dell U3224KB | Manchester, UK
    Apple Silicon Architecture Lead | "Verified Apple Discussions Archive"
    #50764
    Kullanıcı ProfiliIan Bishop
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M2 Max (64GB) | LG UltraFine 5K | Oslo, Norway
    Apple Certified Support Professional (ACSP) | HomeKit / Matter IoT Integrator
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.