Skip to content
MappleCareMappleCare Community ↗
Solved Question iPad & iPadOS Support

[Solved] How to fix Apple Pencil Pro Squeeze & Hover Gesture Failure caused by Digitizer sensor BLE calibration handshake desynchronization on iPad Air 11″ M2

Started by Martha Weber • November 16, 2026 at 2:15 pm • 1 Community Replies • 2 Participants

Home › Forums › iPad & iPadOS Support › [Solved] How to fix Apple Pencil Pro Squeeze & Hover Gesture Failure caused by Digitizer sensor BLE calibration handshake desynchronization on iPad Air 11″ M2

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #44033
    Kullanıcı ProfiliMartha Weber
    Community Contributor
    Diagnostic Hardware Specs: iPad Air 11″ M2 | OS Version: iPadOS 18.1 | Archive Source: Apple Support Community #256310334

    I am running into a persistent issue on my iPad Air 11″ M2 running iPadOS 18.1.
    Whenever the machine encounters Digitizer sensor BLE calibration handshake desynchronization, the following diagnostic log appears in Console:

    PencilService: [Bluetooth] Haptic squeeze sensor payload CRC mismatch on peripheral 0xe025

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    iMac 24″ M3 (16GB) | AST 2 Diagnostic Station | ESD Workstation | San Diego, CA
    Apple Certified Service Technician (ACiT / ACSP) | "Verified Apple Discussions Archive"
    #44034
    Kullanıcı ProfiliLukas Holmes
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
    2. Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
    3. Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 14″ M3 Max (36GB) | BenQ SW321C 4K | Chicago, IL
    Apple Certified Support Professional (ACSP) | Senior macOS Reliability Eng
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.