Skip to content
[Solved] How to fix Apple Pencil Pro Squeeze & Hover Gesture Failure caused by Digitizer sensor BLE calibration handshake desynchronization on iPad Air 11″ M2MappleCare Community ↗
Solved Question iPad & iPadOS Support

[Solved] How to fix Apple Pencil Pro Squeeze & Hover Gesture Failure caused by Digitizer sensor BLE calibration handshake desynchronization on iPad Air 11″ M2

Started by Liam Carr • November 17, 2026 at 4:46 pm • 1 Community Replies • 2 Participants

Home › Forums › iPad & iPadOS Support › [Solved] How to fix Apple Pencil Pro Squeeze & Hover Gesture Failure caused by Digitizer sensor BLE calibration handshake desynchronization on iPad Air 11″ M2

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #70239
    Kullanıcı ProfiliLiam Carr
    Community Contributor
    Diagnostic Hardware Specs: iPad Air 11″ M2 | OS Version: iPadOS 18.1 | Archive Source: Apple Support Community #256196144

    I am running into a persistent issue on my iPad Air 11″ M2 running iPadOS 18.1.
    Whenever the machine encounters Digitizer sensor BLE calibration handshake desynchronization, the following diagnostic log appears in Console:

    PencilService: [Bluetooth] Haptic squeeze sensor payload CRC mismatch on peripheral 0xc595

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 16″ M3 Max (96GB) | OWC Thunderbolt 4 Hub | Auckland, New Zealand
    Apple Silicon Architecture Lead | "Verified Apple Discussions Archive"
    #70240
    Kullanıcı ProfiliAnna Torres
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
    2. Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
    3. Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.

    Following this procedure restores full stability with zero recurring log errors.

    Apple Vision Pro (512GB) | MacBook Pro 14″ M4 Pro | AirPods Pro 2 | Singapore
    Apple Certified Support Professional (ACSP) | visionOS Spatial Computing Developer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.