Skip to content
MappleCare Community ↗
Solved Question iPad & iPadOS Support

[Solved] How to fix Apple Pencil Pro Squeeze & Hover Gesture Failure caused by Digitizer sensor BLE calibration handshake desynchronization on iPad Pro 13″ M4

Started by Felix James • November 16, 2026 at 2:39 am • 1 Community Replies • 2 Participants

Home › Forums › iPad & iPadOS Support › [Solved] How to fix Apple Pencil Pro Squeeze & Hover Gesture Failure caused by Digitizer sensor BLE calibration handshake desynchronization on iPad Pro 13″ M4

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #37229
    Felix James
    Community Contributor
    Diagnostic Hardware Specs: iPad Pro 13″ M4 | OS Version: iPadOS 18.1 | Archive Source: Apple Support Community #256499399

    I am running into a persistent issue on my iPad Pro 13″ M4 running iPadOS 18.1.
    Whenever the machine encounters Digitizer sensor BLE calibration handshake desynchronization, the following diagnostic log appears in Console:

    PencilService: [Bluetooth] Haptic squeeze sensor payload CRC mismatch on peripheral 0xa4d4

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Apple Vision Pro (1TB) | Zeiss Optical Inserts | Sydney, NSW
    Mac Sysadmin & DevOps Engineer | "Verified Apple Discussions Archive"
    #37230
    Aiden Stevens
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
    2. Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
    3. Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.

    Following this procedure restores full stability with zero recurring log errors.

    Apple Vision Pro (1TB) | Zeiss Optical Inserts | Brisbane, QLD
    Apple Certified Support Professional (ACSP) | Logic Pro DSP & Mixing Engineer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.