Skip to content
[Solved] How to fix Apple TV 4K eARC Audio Dropouts with Soundbar / AVR caused by HDMI 2.1 eARC bandwidth handshake failure and Dolby Atmos MAT audio payload truncation on Apple TV 4KMappleCare Community ↗

[Solved] How to fix Apple TV 4K eARC Audio Dropouts with Soundbar / AVR caused by HDMI 2.1 eARC bandwidth handshake failure and Dolby Atmos MAT audio payload truncation on Apple TV 4K

Started by Felix Carr • November 17, 2026 at 3:59 pm • 1 Community Replies • 2 Participants

Home › Forums › HomeKit, Apple TV & Smart Home › [Solved] How to fix Apple TV 4K eARC Audio Dropouts with Soundbar / AVR caused by HDMI 2.1 eARC bandwidth handshake failure and Dolby Atmos MAT audio payload truncation on Apple TV 4K

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #69431
    Kullanıcı ProfiliFelix Carr
    Community Contributor
    Diagnostic Hardware Specs: Apple TV 4K (3rd Gen) | OS Version: tvOS 18.1 | Archive Source: Apple Support Community #256624972

    I am running into a persistent issue on my Apple TV 4K (3rd Gen) running tvOS 18.1.
    Whenever the machine encounters HDMI 2.1 eARC bandwidth handshake failure and Dolby Atmos MAT audio payload truncation, the following diagnostic log appears in Console:

    audiouxd: [AudioFormat] eARC stream packet overflow: dropping Dolby Atmos metadata frame at 0x2323

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 16″ M1 Max (64GB, Workhorse) | Dell U3224KB | Oslo, Norway
    Senior iOS / Swift Developer | "Verified Apple Discussions Archive"
    #69432
    Kullanıcı ProfiliHarper Underwood
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Replacing with certified 48Gbps Ultra High Speed HDMI cable and verifying eARC pass-through mode.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Ensure HDMI cable is certified Ultra High Speed 48Gbps (HDMI 2.1); 18Gbps cables will dropout during Atmos MAT transmission.
    2. In tvOS Settings > Video and Audio > Audio Output, set Audio Format to Auto, Dolby Atmos.
    3. In TV HDMI CEC settings, ensure eARC is set to Pass-through / Bitstream, not PCM stereo.

    Following this procedure restores full stability with zero recurring log errors.

    Apple Vision Pro (1TB) | Zeiss Optical Inserts | San Francisco, CA
    Apple Certified Support Professional (ACSP) | Audio Unit & CoreAudio Architect
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.