Skip to content
MappleCare Community ↗

[Solved] How to fix Apple TV 4K eARC Audio Dropouts with Soundbar / AVR caused by HDMI 2.1 eARC bandwidth handshake failure and Dolby Atmos MAT audio payload truncation on Apple TV 4K

Started by Cynthia Miller • November 15, 2026 at 11:20 am • 1 Community Replies • 2 Participants

Home › Forums › HomeKit, Apple TV & Smart Home › [Solved] How to fix Apple TV 4K eARC Audio Dropouts with Soundbar / AVR caused by HDMI 2.1 eARC bandwidth handshake failure and Dolby Atmos MAT audio payload truncation on Apple TV 4K

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #25737
    Cynthia Miller
    Certified Tech (Lvl 5)
    Diagnostic Hardware Specs: Apple TV 4K (2nd Gen) | OS Version: tvOS 18.1 | Archive Source: Apple Support Community #256587187

    I am running into a persistent issue on my Apple TV 4K (2nd Gen) running tvOS 18.1.
    Whenever the machine encounters HDMI 2.1 eARC bandwidth handshake failure and Dolby Atmos MAT audio payload truncation, the following diagnostic log appears in Console:

    audiouxd: [AudioFormat] eARC stream packet overflow: dropping Dolby Atmos metadata frame at 0x5b10

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 16″ M3 Max (128GB) | iPad Pro 11″ M4 (Apple Pencil Pro) | Edinburgh, UK
    Computer Science & Machine Learning Student | "Verified Apple Discussions Archive"
    #25738
    Angela Morgan
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Replacing with certified 48Gbps Ultra High Speed HDMI cable and verifying eARC pass-through mode.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Ensure HDMI cable is certified Ultra High Speed 48Gbps (HDMI 2.1); 18Gbps cables will dropout during Atmos MAT transmission.
    2. In tvOS Settings > Video and Audio > Audio Output, set Audio Format to Auto, Dolby Atmos.
    3. In TV HDMI CEC settings, ensure eARC is set to Pass-through / Bitstream, not PCM stereo.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 14″ M4 (24GB) | DJI Mic 2 | Anker Prime 27,650mAh Bank | Perth, AU
    Apple Certified Support Professional (ACSP) | Digital Nomad & Travel Filmmaker
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.