Skip to content
MappleCare Community ↗

[Solved] How to fix External Display Flickering at High Refresh Rates caused by DSC compression and VRR handshake failure over USB-C DisplayPort on Mac mini M4 Pro

Started by Harper Tran • November 15, 2026 at 9:41 am • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] How to fix External Display Flickering at High Refresh Rates caused by DSC compression and VRR handshake failure over USB-C DisplayPort on Mac mini M4 Pro

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #24304
    Harper Tran
    Community Contributor
    Diagnostic Hardware Specs: Mac mini M4 Pro | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256886196

    I am running into a persistent issue on my Mac mini M4 Pro running macOS Sequoia 15.1.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0x754c link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Mac Pro M2 Ultra | Dual Pro Display XDR | Blackmagic UltraStudio 4K Mini | Pittsburgh, PA
    Final Cut Pro / DaVinci Colorist & Editor | "Verified Apple Discussions Archive"
    #24305
    Kimberly Maier
    Certified Tech (Lvl 5)
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Air 15″ M2 (16GB) | GoPro Hero 12 Black | Apple Watch Ultra 2 | San Jose, CA
    Apple Certified Support Professional (ACSP) | Digital Nomad & Travel Filmmaker
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.