Skip to content
[Solved] How to fix External Display Flickering at High Refresh Rates caused by DSC compression and VRR handshake failure over USB-C DisplayPort on Mac Studio M2 UltraMappleCare Community ↗

[Solved] How to fix External Display Flickering at High Refresh Rates caused by DSC compression and VRR handshake failure over USB-C DisplayPort on Mac Studio M2 Ultra

Started by Julien Reid • November 17, 2026 at 7:33 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] How to fix External Display Flickering at High Refresh Rates caused by DSC compression and VRR handshake failure over USB-C DisplayPort on Mac Studio M2 Ultra

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #73070
    Kullanıcı ProfiliJulien Reid
    Community Contributor
    Diagnostic Hardware Specs: Mac Studio M2 Ultra | OS Version: macOS Sonoma 14.7 | Archive Source: Apple Support Community #256048055

    I am running into a persistent issue on my Mac Studio M2 Ultra running macOS Sonoma 14.7.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0xce0c link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 16″ M1 Max (64GB, Workhorse) | Dell U3224KB | Singapore
    Enterprise Jamf & MDM Admin | "Verified Apple Discussions Archive"
    #73071
    Kullanıcı ProfiliLiam Klein
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 14″ M3 Pro (36GB) | OWC Envoy Pro FX | iPad Pro 13″ M4 | Tokyo, JP
    Apple Certified Support Professional (ACSP) | Commercial Photographer & Digitech
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.