MappleCare Community
[Solved] How to fix External Display Flickering at High Refresh Rates caused by DSC compression and VRR handshake failure over USB-C DisplayPort on Mac Studio M2 Ultra
Find answers from other Apple users or start a discussion about your device.
Home › Forums › MacBook, iMac & macOS Lab › [Solved] How to fix External Display Flickering at High Refresh Rates caused by DSC compression and VRR handshake failure over USB-C DisplayPort on Mac Studio M2 Ultra
- This topic has 1 reply, 2 voices, and was last updated 1 hour, 57 minutes ago by
Jesse Mueller.
-
AuthorPosts
-
November 14, 2026 at 10:57 pm #14001
Kelly Reyes
Community ContributorDiagnostic Hardware Specs: Mac Studio M2 Ultra | OS Version: macOS Sonoma 14.7 | Archive Source: Apple Support Community #256842488I am running into a persistent issue on my Mac Studio M2 Ultra running macOS Sonoma 14.7.
Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:WindowServer: [com.apple.WindowServer:server] Display 0x3840 link training failure / DSC buffer renegotiationI verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?
iMac 24″ M3 (16GB) | AST 2 Diagnostic Station | ESD Workstation | Vancouver, BCApple Certified Service Technician (ACiT / ACSP) | "Verified Apple Discussions Archive"November 14, 2026 at 10:57 pm #14002Jesse Mueller
Community ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
- Reset display preferences:
sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist killall -9 WindowServer - In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.
Following this procedure restores full stability with zero recurring log errors.
Mac Studio M2 Max (32GB) | EIZO ColorEdge CG279X | Wacom Intuos Pro | Barcelona, ESApple Certified Support Professional (ACSP) | Commercial Photographer & Digitech -
AuthorPosts
- You must be logged in to reply to this topic.