Skip to content
MappleCareMappleCare Community ↗

[Solved] How to fix External Display Flickering at High Refresh Rates caused by DSC compression and VRR handshake failure over USB-C DisplayPort on MacBook Pro 14″ M1 Max

Started by Michael Cook • November 16, 2026 at 2:37 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] How to fix External Display Flickering at High Refresh Rates caused by DSC compression and VRR handshake failure over USB-C DisplayPort on MacBook Pro 14″ M1 Max

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #44411
    Kullanıcı ProfiliMichael Cook
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 14″ M1 Max | OS Version: macOS Sequoia 15.0.1 | Archive Source: Apple Support Community #256149716

    I am running into a persistent issue on my MacBook Pro 14″ M1 Max running macOS Sequoia 15.0.1.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0x24c5 link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    iPhone 16 Pro (512GB) | AirPods Pro 2 (USB-C) | Boston, MA
    Xcode Build Matrix Architect | "Verified Apple Discussions Archive"
    #44412
    Kullanıcı ProfiliJanet Schneider
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 14″ M4 (24GB) | DJI Mic 2 | Anker Prime 27,650mAh Bank | Helsinki, FI
    Apple Certified Support Professional (ACSP) | Digital Nomad & Travel Filmmaker
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.