Skip to content
MappleCare Community ↗

[Solved] How to fix External Display Flickering at High Refresh Rates caused by DSC compression and VRR handshake failure over USB-C DisplayPort on MacBook Pro 14″ M1 Max

Started by Amelia Wells • November 15, 2026 at 9:54 am • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] How to fix External Display Flickering at High Refresh Rates caused by DSC compression and VRR handshake failure over USB-C DisplayPort on MacBook Pro 14″ M1 Max

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #24538
    Amelia Wells
    Senior Specialist (Lvl 8)
    Diagnostic Hardware Specs: MacBook Pro 14″ M1 Max | OS Version: macOS Sequoia 15.0.1 | Archive Source: Apple Support Community #256828746

    I am running into a persistent issue on my MacBook Pro 14″ M1 Max running macOS Sequoia 15.0.1.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0x5366 link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Mac Studio M1 Ultra (64GB) | BenQ SW321C | Final Cut Pro 11 | Auckland, NZ
    Final Cut Pro / DaVinci Colorist & Editor | "Verified Apple Discussions Archive"
    #24539
    Dylan Romero
    Certified Tech (Lvl 5)
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Air 15″ M3 (24GB) | LG UltraFine 5K | Apple Pencil Pro | Bristol, UK
    Apple Certified Support Professional (ACSP) | Product Designer & Design Systems Lead
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.