Skip to content
MappleCare Community ↗

[Solved] How to fix External Display Flickering at High Refresh Rates caused by DSC compression and VRR handshake failure over USB-C DisplayPort on MacBook Pro 16″ M3 Pro

Started by Owen Parker • November 15, 2026 at 1:43 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] How to fix External Display Flickering at High Refresh Rates caused by DSC compression and VRR handshake failure over USB-C DisplayPort on MacBook Pro 16″ M3 Pro

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #27804
    Owen Parker
    Apple Master (Lvl 10)
    Diagnostic Hardware Specs: MacBook Pro 16″ M3 Pro | OS Version: macOS Sonoma 14.7 | Archive Source: Apple Support Community #256229630

    I am running into a persistent issue on my MacBook Pro 16″ M3 Pro running macOS Sonoma 14.7.
    Whenever the machine encounters DSC compression and VRR handshake failure over USB-C DisplayPort, the following diagnostic log appears in Console:

    WindowServer: [com.apple.WindowServer:server] Display 0x98ee link training failure / DSC buffer renegotiation

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    iPhone 15 Pro | Apple Watch Series 10 | Denver, CO
    Field Photographer | "Verified Apple Discussions Archive"
    #27805
    Randy Johnson
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
    2. Reset display preferences:
      sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist
      rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
      killall -9 WindowServer
    3. In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.

    Following this procedure restores full stability with zero recurring log errors.

    Mac mini M4 (16GB) Home Server | Apple TV 4K | Eve Energy Thread Mesh | Milan, IT
    Apple Certified Support Professional (ACSP) | Smart Home & Matter/Thread Integrator
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.