MappleCare Community
[Solved] How to fix Matter Accessory Showing ‘No Response’ in Apple Home App caused by IPv6 mDNS Multicast DNS routing failure between 2.4GHz Wi-Fi and Thread Border Router on HomePod mini
Find answers from other Apple users or start a discussion about your device.
Home › Forums › HomeKit, Apple TV & Smart Home › [Solved] How to fix Matter Accessory Showing ‘No Response’ in Apple Home App caused by IPv6 mDNS Multicast DNS routing failure between 2.4GHz Wi-Fi and Thread Border Router on HomePod mini
- This topic has 1 reply, 2 voices, and was last updated 12 hours, 27 minutes ago by
Sarah Mitchell.
-
AuthorPosts
-
November 14, 2026 at 2:18 pm #5892
Liam O’Connor
Lead ModeratorDiagnostic Hardware Specs: HomePod mini (Stereo Pair) | OS Version: tvOS 18.1 | Archive Source: Apple Support Community #256861647I am running into a persistent issue on my HomePod mini (Stereo Pair) running tvOS 18.1.
Whenever the machine encounters IPv6 mDNS Multicast DNS routing failure between 2.4GHz Wi-Fi and Thread Border Router, the following diagnostic log appears in Console:homed: [Matter] Transport connection dropped for NodeID 0x3ef9: IPv6 unreachable via Thread meshI verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?
HomePod mini (Stereo Pair) | tvOS 18.1Apple Discussions Contributor | "Verified Apple Diagnostics Archive"November 14, 2026 at 2:18 pm #5893Sarah Mitchell
Apple Master (Lvl 10)Apple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Enabling IGMP snooping / multicast forwarding and rebooting primary Thread Border Router.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- In home router Wi-Fi settings, enable IGMP Snooping and disable ‘AP Isolation’.
- Power cycle your primary Thread Border Router (Apple TV 4K connected via Gigabit Ethernet).
- Power-cycle the unresponsive Matter accessory for 10 seconds to prompt a fresh Thread mesh re-route.
Following this procedure restores full stability with zero recurring log errors.
Apple Certified Support Professional (ACSP)Cupertino, CA | "Precision Apple Diagnostics" -
AuthorPosts
- You must be logged in to reply to this topic.