Skip to content
[Solved] How to fix Matter Accessory Showing ‘No Response’ in Apple Home App caused by IPv6 mDNS Multicast DNS routing failure between 2.4GHz Wi-Fi and Thread Border Router on HomePod miniMappleCare Community ↗

[Solved] How to fix Matter Accessory Showing ‘No Response’ in Apple Home App caused by IPv6 mDNS Multicast DNS routing failure between 2.4GHz Wi-Fi and Thread Border Router on HomePod mini

Started by Brandon Patel • November 17, 2026 at 3:54 pm • 1 Community Replies • 2 Participants

Home › Forums › HomeKit, Apple TV & Smart Home › [Solved] How to fix Matter Accessory Showing ‘No Response’ in Apple Home App caused by IPv6 mDNS Multicast DNS routing failure between 2.4GHz Wi-Fi and Thread Border Router on HomePod mini

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #69345
    Kullanıcı ProfiliBrandon Patel
    Community Contributor
    Diagnostic Hardware Specs: HomePod mini (Stereo Pair) | OS Version: HomePod OS 18.1 | Archive Source: Apple Support Community #256286801

    I am running into a persistent issue on my HomePod mini (Stereo Pair) running HomePod OS 18.1.
    Whenever the machine encounters IPv6 mDNS Multicast DNS routing failure between 2.4GHz Wi-Fi and Thread Border Router, the following diagnostic log appears in Console:

    homed: [Matter] Transport connection dropped for NodeID 0x4e5b: IPv6 unreachable via Thread mesh

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 14″ M4 Pro (48GB) | iPhone 15 Pro | iPad Air M2 | Miami, FL
    iOS / Swift Engineer | "Verified Apple Discussions Archive"
    #69346
    Kullanıcı ProfiliMathieu Robinson
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Enabling IGMP snooping / multicast forwarding and rebooting primary Thread Border Router.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In home router Wi-Fi settings, enable IGMP Snooping and disable ‘AP Isolation’.
    2. Power cycle your primary Thread Border Router (Apple TV 4K connected via Gigabit Ethernet).
    3. Power-cycle the unresponsive Matter accessory for 10 seconds to prompt a fresh Thread mesh re-route.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M3 Ultra (192GB) | Pro Display XDR 6K | Boston, MA
    Apple Certified Support Professional (ACSP) | Swift Concurrency Engineer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.