Skip to content
[Solved] How to fix ProRes Log 4K 120fps Video Recording Dropping Frames caused by External USB-C SSD write speed cache exhaustion on iPhone 16 Pro 256GBMappleCare Community ↗
Solved Question iPhone & iOS Help Desk

[Solved] How to fix ProRes Log 4K 120fps Video Recording Dropping Frames caused by External USB-C SSD write speed cache exhaustion on iPhone 16 Pro 256GB

Started by Peter Foster • November 18, 2026 at 4:23 pm • 1 Community Replies • 2 Participants

Home › Forums › iPhone & iOS Help Desk › [Solved] How to fix ProRes Log 4K 120fps Video Recording Dropping Frames caused by External USB-C SSD write speed cache exhaustion on iPhone 16 Pro 256GB

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #93453
    Kullanıcı ProfiliPeter Foster
    Community Contributor
    Diagnostic Hardware Specs: iPhone 16 Pro 256GB | OS Version: iOS 18.0 | Archive Source: Apple Support Community #256806915

    I am running into a persistent issue on my iPhone 16 Pro 256GB running iOS 18.0.
    Whenever the machine encounters External USB-C SSD write speed cache exhaustion, the following diagnostic log appears in Console:

    Camera: [AVCaptureSession] Target storage write rate dropped below 220MB/s threshold - session halted

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 14″ M3 Max (36GB) | BenQ SW321C 4K | Zurich, Switzerland
    Apple Silicon Architecture Lead | "Verified Apple Discussions Archive"
    #93455
    Kullanıcı ProfiliStella Harris
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Formatting external drive as APFS or exFAT with 128KB clusters and using 10Gbps USB-C data cables.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Format the external SSD on a Mac as APFS for optimal sequential write consistency.
    2. Ensure cable is rated for 10Gbps or 20Gbps (USB 3.2 Gen 2×2); in-box white charging cables are USB 2.0 (40MB/s).
    3. Use drives with sustained non-SLC cache write capabilities (e.g. SanDisk Extreme Pro v2 or Crucial T700 enclosures).

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Air 15″ M3 (24GB) | LG UltraFine 5K | Apple Pencil Pro | Ottawa, ON
    Apple Certified Support Professional (ACSP) | Product Designer & Design Systems Lead
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.