Skip to content
MappleCare Community ↗
Solved Question iPhone & iOS Help Desk

[Solved] How to fix Restore Error {err} in Finder / iTunes caused by NAND communication timeout during early bootloader initialization on iPhone 16 Pro Max

Started by Amanda Patel • November 15, 2026 at 8:41 pm • 1 Community Replies • 2 Participants

Home › Forums › iPhone & iOS Help Desk › [Solved] How to fix Restore Error {err} in Finder / iTunes caused by NAND communication timeout during early bootloader initialization on iPhone 16 Pro Max

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #33208
    Amanda Patel
    Community Contributor
    Diagnostic Hardware Specs: iPhone 16 Pro Max | OS Version: iOS 18.1 | Archive Source: Apple Support Community #256371467

    I am running into a persistent issue on my iPhone 16 Pro Max running iOS 18.1.
    Whenever the machine encounters NAND communication timeout during early bootloader initialization, the following diagnostic log appears in Console:

    AOSKit: [Restore] Device state transition failed: result code 4014 during secure boot image verification

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Apple TV 4K 3rd Gen | Dual HomePod mini | iPhone 15 Pro Max | London, UK
    Smart Home & Matter/Thread Integrator | "Verified Apple Discussions Archive"
    #33209
    Quinn Schmidt
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Direct Thunderbolt connection, forcing true DFU mode, and executing an in-place software update or Configurator revive.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Never select ‘Restore’ if data is unbacked-up; always select Update.
    2. Use an authentic Apple USB-C 60W/240W cable connected directly to Mac ports (no hubs).
    3. Enter true black-screen DFU mode and execute an Apple Configurator Revive Device pass.

    Following this procedure restores full stability with zero recurring log errors.

    iPad Air 13″ M2 (256GB) | Apple Pencil Pro | Montreal, QC
    Apple Certified Support Professional (ACSP) | Mac Sysadmin & DevOps Engineer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.