Skip to content
MappleCare Community ↗

[Solved] How to fix Thunderbolt 4 SSD Speeds Throttled to USB 3.0 caused by Passive cable PCIe link negotiation falling back to USB 3.2 Gen 2 on MacBook Pro 16″ M2 Max

Started by Linda James • November 15, 2026 at 12:35 pm • 1 Community Replies • 2 Participants

Home › Forums › MacBook, iMac & macOS Lab › [Solved] How to fix Thunderbolt 4 SSD Speeds Throttled to USB 3.0 caused by Passive cable PCIe link negotiation falling back to USB 3.2 Gen 2 on MacBook Pro 16″ M2 Max

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #26792
    Linda James
    Community Contributor
    Diagnostic Hardware Specs: MacBook Pro 16″ M2 Max | OS Version: macOS Sequoia 15.1 | Archive Source: Apple Support Community #256158171

    I am running into a persistent issue on my MacBook Pro 16″ M2 Max running macOS Sequoia 15.1.
    Whenever the machine encounters Passive cable PCIe link negotiation falling back to USB 3.2 Gen 2, the following diagnostic log appears in Console:

    kernel: [IOThunderboltFamily] Port 1 PCIe tunnel timeout - falling back to xHCI 10Gbps bridge

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    Mac Studio M2 Ultra (128GB) | ASUS ProArt PA32UCG-K | OWC ThunderBay 8 | Toronto, ON
    Final Cut Pro / DaVinci Colorist & Editor | "Verified Apple Discussions Archive"
    #26793
    Steven Patterson
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Verifying certified 40Gbps active cables, resetting Thunderbolt kernel extensions, and enabling TRIM.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Verify cable has official Thunderbolt 4 lightning bolt and ‘4’ logo. Charging cables will not negotiate PCIe.
    2. Reset bus enumeration: sudo killall -9 diskarbitrationd.
    3. Enable APFS TRIM support: sudo trimforce enable.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Pro 14″ M2 Max (32GB) | Pro Display XDR | iPad Pro 13″ M4 | Nashville, TN
    Apple Certified Support Professional (ACSP) | Product Designer & Design Systems Lead
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.