Skip to content
[Solved] iPad Air 11″ M2 Apple Pencil Pro Squeeze & Hover Gesture Failure (iPadOS 18.0.1) – Verified TroubleshootingMappleCare Community ↗
Solved Question iPad & iPadOS Support

[Solved] iPad Air 11″ M2 Apple Pencil Pro Squeeze & Hover Gesture Failure (iPadOS 18.0.1) – Verified Troubleshooting

Started by Christian Freeman • November 16, 2026 at 7:01 pm • 1 Community Replies • 2 Participants

Home › Forums › iPad & iPadOS Support › [Solved] iPad Air 11″ M2 Apple Pencil Pro Squeeze & Hover Gesture Failure (iPadOS 18.0.1) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #48865
    Kullanıcı ProfiliChristian Freeman
    Community Contributor
    Diagnostic Hardware Specs: iPad Air 11″ M2 | OS Version: iPadOS 18.0.1 | Archive Source: Apple Support Community #256238576

    I am running into a persistent issue on my iPad Air 11″ M2 running iPadOS 18.0.1.
    Whenever the machine encounters Digitizer sensor BLE calibration handshake desynchronization, the following diagnostic log appears in Console:

    PencilService: [Bluetooth] Haptic squeeze sensor payload CRC mismatch on peripheral 0xef19

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Pro 16″ M3 Pro (36GB) | Studio Display | Magic Mouse & Trackpad | Atlanta, GA
    Product Designer & Design Systems Lead | "Verified Apple Discussions Archive"
    #48866
    Kullanıcı ProfiliLogan Cruz
    Certified Tech (Lvl 5)
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
    2. Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
    3. Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.

    Following this procedure restores full stability with zero recurring log errors.

    Mac mini M2 Pro (32GB) | Dell UltraSharp U3223QE | Jamf Cloud Admin | Vienna, AT
    Apple Certified Support Professional (ACSP) | Enterprise Mac Sysadmin & Jamf Pro Architect
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.