Skip to content
MappleCareMappleCare Community ↗
Solved Question iPad & iPadOS Support

[Solved] iPad Pro 11″ M4 Apple Pencil Pro Squeeze & Hover Gesture Failure (iPadOS 18.1) – Verified Troubleshooting

Started by Frederik Jordan • November 16, 2026 at 12:03 pm • 1 Community Replies • 2 Participants

Home › Forums › iPad & iPadOS Support › [Solved] iPad Pro 11″ M4 Apple Pencil Pro Squeeze & Hover Gesture Failure (iPadOS 18.1) – Verified Troubleshooting

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #41916
    Kullanıcı ProfiliFrederik Jordan
    Community Contributor
    Diagnostic Hardware Specs: iPad Pro 11″ M4 | OS Version: iPadOS 18.1 | Archive Source: Apple Support Community #256664365

    I am running into a persistent issue on my iPad Pro 11″ M4 running iPadOS 18.1.
    Whenever the machine encounters Digitizer sensor BLE calibration handshake desynchronization, the following diagnostic log appears in Console:

    PencilService: [Bluetooth] Haptic squeeze sensor payload CRC mismatch on peripheral 0x7310

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    MacBook Air 13″ M2 (16GB) | Magic Trackpad 2 | Singapore
    Enterprise Jamf & MDM Admin | "Verified Apple Discussions Archive"
    #41917
    Kullanıcı ProfiliDominic Lloyd
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
    2. Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
    3. Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.

    Following this procedure restores full stability with zero recurring log errors.

    MacBook Air 15″ M3 (24GB) | CalDigit SOHO | Zurich, Switzerland
    Apple Certified Support Professional (ACSP) | macOS Kernel & Driver Engineer
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.