Skip to content
[Solved] iPad Pro 11″ M4 encountering Apple Pencil Pro Squeeze & Hover Gesture Failure after update (iPadOS 18.1)MappleCare Community ↗
Solved Question iPad & iPadOS Support

[Solved] iPad Pro 11″ M4 encountering Apple Pencil Pro Squeeze & Hover Gesture Failure after update (iPadOS 18.1)

Started by Brian Hansen • November 17, 2026 at 2:12 pm • 1 Community Replies • 2 Participants

Home › Forums › iPad & iPadOS Support › [Solved] iPad Pro 11″ M4 encountering Apple Pencil Pro Squeeze & Hover Gesture Failure after update (iPadOS 18.1)

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #67888
    Kullanıcı ProfiliBrian Hansen
    Community Contributor
    Diagnostic Hardware Specs: iPad Pro 11″ M4 | OS Version: iPadOS 18.1 | Archive Source: Apple Support Community #256458556

    I am running into a persistent issue on my iPad Pro 11″ M4 running iPadOS 18.1.
    Whenever the machine encounters Digitizer sensor BLE calibration handshake desynchronization, the following diagnostic log appears in Console:

    PencilService: [Bluetooth] Haptic squeeze sensor payload CRC mismatch on peripheral 0x6b48

    I verified that hardware connections are intact and tested across different power sources. What is the verified diagnostic procedure to permanently eliminate this symptom?

    iPhone 16 Pro (512GB) | AirPods Pro 2 (USB-C) | Seoul, South Korea
    WebKit / Safari Optimization Dev | "Verified Apple Discussions Archive"
    #67889
    Kullanıcı ProfiliHarper Moore
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
    2. Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
    3. Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.

    Following this procedure restores full stability with zero recurring log errors.

    iPhone 16 Pro (512GB) | AirPods Pro 2 (USB-C) | Montreal, QC
    Apple Certified Support Professional (ACSP) | Audio Unit & CoreAudio Architect
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.